Belkin: Changing Wireless Security Type/Disabling

Discus and support Belkin: Changing Wireless Security Type/Disabling in XboX Networking Hardware to solve the problem; Belkin (Routers): Changing Wireless Security Type/Disabling Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None)... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Aug 1, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Belkin: Changing Wireless Security Type/Disabling


    Belkin (Routers): Changing Wireless Security Type/Disabling
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)
    Changing Wireless Security Type/Disabling

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Security from the menu on the left under the Wireless section.
    7. To change or disable the Wireless Security, select the desired Security Mode from the dropdown (Disabled, WPA/WPA2-Personal(PSK), 128-bit WEP or 64-bit WEP).
    8. If WPA/WPA2-Personal(PSK) is selected, choose the Authentication (WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK) and Encryption Technique (TKIP or AES). WPA2-PSK with AES is recommended.
    9. Enter the Pre-Shared Key or WEP Key.
    10. If WEP security is selected the password will need to be 10 characters in length (if 64-bit) or 26 characters in length (if 128-bit) and can only use 0-9 and A-F.
    11. If WPA or WPA2 was selected the password can be between 8-63 characters, is case sensitive and can use any character on your keyboard.
    12. Once the passphrase has been entered select Apply Changes at the bottom of the page.

    :)
     
    XB1R Hades, Aug 1, 2014
    #1
  2. XBR Dionysus
    XBR Dionysus Guest
    D-Link: Changing Wireless Security Type/ Disabling Wireless Security

    D-Link (Modems/Gateways): Changing Wireless Security Type/ Disabling Wireless Security
    changing wireless security type/ disabling wireless security
     
    XBR Dionysus, Aug 1, 2014
    #2
  3. D-Link: Changing Wireless Security Type/ Disabling Wireless Security

    changing wireless security type/ disabling wireless security
     
    KYLANTHEGAMER44, Aug 1, 2014
    #3
  4. KYLANTHEGAMER44 Win User

    D-Link: Changing Wireless Security Type/ Disabling Wireless Security

    changing wireless security type/ disabling wireless security
  5. Skunkboy74 Win User

    So Frustrated with Xbox live and Apple-Help..cant connect

    Hey nyan dude!

    Is your airport extreme router using WEP security? The Xbox 360 has occasionally been unable to obtain an IP address when the router uses WEP security. If you're able, try using WPA2 instead.

    In case it's helpful, here's what the thread on that router says about changing the security type:

    Changing Wireless Security Type/ Disabling Wireless Security



    1. Open the AirPort Admin Utility. (It is installed in the Utilities folder in the Applications folder on a Macintosh computer, and in Start > All Programs > AirPort on computers using Windows.)
    2. Click on your base station.
    3. Enter the admin password you created when the device was initially setup.
    4. Click the edit button on the resulting pop up.
    5. Select Wireless from the tabs at the top.
    6. Select the desired Security Type from the Wireless Security drop down. Select None for no Wireless Security.
    7. Click the Update button in the lower right.
    Hope that helps!
  6. Im Going Space Win User

    XBOX One consistently losing network connection.

    a few things to try;

    Change the security type on for your wireless

    Change the Channel your wireless is using
  7. taidara Win User

    Not accepting my wifi password

    What type of Security method are you using to secure your wireless network, WEP, WPA, WPA2?

    What type of encryption method are using, along with the security method, WEP/TKIP, AES/CCMP?

    Make sure you have WPS (Wifi Protected Setup) disabled on your wireless router. Manually setup your wireless security.

    If you go to your consoles network settings and "detailed network statistics" what is your current signal strength?
  8. Tgeekster Win User

    Connecting to XBl via Intel MyWifi

    Hi Damongooose,



    What kind of wireless security are you using?



    For testing purposes you may want to disable the wireless security and see if it then connects. If it does you will want to try and use an alternate security type than what you are currently using.



    Out of curiosity how are you connecting the laptop to the internet?
Thema:

Belkin: Changing Wireless Security Type/Disabling

Loading...
  1. Belkin: Changing Wireless Security Type/Disabling - Similar Threads - Belkin Changing Wireless

  2. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  3. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  4. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  5. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  6. Belkin: Changing Wireless Mode

    in XboX Networking Hardware
    Belkin: Changing Wireless Mode: Belkin (Routers): Changing Wireless Mode Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Changing Wireless Mode Open a web browser. In the address bar...
  7. Belkin: Changing the Wireless Channel

    in XboX Networking Hardware
    Belkin: Changing the Wireless Channel: Belkin (Routers): Changing the Wireless Channel Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Changing the Wireless Channel Open a web browser. In...
  8. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not...
  9. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  10. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) Plug the computer into a LAN...