Belkin: Wireless Security

Discus and support Belkin: Wireless Security in XboX Networking Hardware to solve the problem; Belkin (Routers): Wireless Security Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) How to Find Wireless... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Aug 1, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Belkin: Wireless Security


    Belkin (Routers): Wireless Security
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)
    How to Find Wireless Password (WPA/WEP)

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Select Security under WIFI on the right hand side of the screen.
    6. Your password will be listed under Pre-shared Key or WEP key.
    Changing Wireless Security Type/Disabling

    1. Open a web browser.
    2. In the address bar at the top, type in 192.168.2.1
    3. Input the password and click Login (by default, the password should be left blank).
    4. From the main menu expand Advanced Settings.
    5. Select Security under WIFI on the right hand side of the screen.
    6. The security type will be listed as Authentication.
    7. Set to none for no security or choose your preferred encryption type.

    :)
     
    XB1R Hades, Aug 1, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Belkin: Wireless Security

    Belkin (Routers): Wireless Security
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    How to Find Wireless Password (WPA/WEP)

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Security from the menu on the left under the Wireless section.
    7. Uncheck the box labeled "Obscure PSK" to make the Wireless Password visible.
    Changing Wireless Security Type/Disabling

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Security from the menu on the left under the Wireless section.
    7. To change or disable the Wireless Security, select the desired Security Mode from the dropdown (Disabled, WPA/WPA2-Personal(PSK), 128-bit WEP or 64-bit WEP).
    8. If WPA/WPA2-Personal(PSK) is selected, choose the Authentication (WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK) and Encryption Technique (TKIP or AES). WPA2-PSK with AES is recommended.
    9. Enter the Pre-Shared Key or WEP Key.
    10. If WEP security is selected the password will need to be 10 charecters in length (if 64-bit) or 26 characters in length (if 128-bit) and can only use 0-9 and A-F.
    11. If WPA or WPA2 was selected the password can be between 8-63 characters, is case sensative and can use any character on your keyboard.
    12. Once the passphrase has been entered select Apply Changes at the bottom of the page.
     
    XB1R Hades, Aug 1, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Belkin: Wireless Security

    Belkin (Routers): Wireless Security
    Login Information

    • Gateway - 192.168.2.1
    • Username - N/A (None)
    • Password - N/A (None)

    How to Find Wireless Password (WPA/WEP)

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Security from the menu on the left under the Wireless section.
    7. Uncheck the box labeled "Obscure PSK" to make the Wireless Password visible.
    Changing Wireless Security Type/Disabling

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. In the address bar at the top, type in 192.168.2.1
    4. Click Login in the upper right.
    5. Input the password and click Login (by default, the password should be left blank).
    6. Select Security from the menu on the left under the Wireless section.
    7. To change or disable the Wireless Security, select the desired Security Mode from the dropdown (Disabled, WPA/WPA2-Personal(PSK), 128-bit WEP or 64-bit WEP).
    8. If WPA/WPA2-Personal(PSK) is selected, choose the Authentication (WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK) and Encryption Technique (TKIP or AES). WPA2-PSK with AES is recommended.
    9. Enter the Pre-Shared Key or WEP Key.
    10. If WEP security is selected the password will need to be 10 charecters in length (if 64-bit) or 26 characters in length (if 128-bit) and can only use 0-9 and A-F.
    11. If WPA or WPA2 was selected the password can be between 8-63 characters, is case sensative and can use any character on your keyboard.
    12. Once the passphrase has been entered select Apply Changes at the bottom of the page.
     
    XB1R Apollo, Aug 1, 2014
    #3
  4. GMAN990 Win User

    Problem with router

    Ok the first thing to do (because some Belkins have issues with the Xbox wireless adapters) is to turn off wireless security as a test to see if it can connect ok like that.

    Let me know if that works
  5. GMAN990 Win User

    Problem with router

    You don't need the disc. Ok try your different wireless modes with security off. So instead of Wireless B+G+N just try B+G

    Also please post up the firmware version you are using on the Belkin
  6. GMAN990 Win User

    Xbox 360 not connecting to my wireless network.

    Hi

    As a test can you try turning off wireless security on the Belkin router to see if it connects with no security?

    I'm assuming that when you run the XBox live connection test it fails at the Network level?

    Please give that a try (turning off WPA) and see what happens
  7. CB Rebel Win User

    Cannot connect to specific friend

    just firewall.. then should be under a security tab if i remember belkin dont deal with belkins much anymore where im at
  8. maundy69 Win User

    xbox live

    Belkin g wireless router it is
Thema:

Belkin: Wireless Security

Loading...
  1. Belkin: Wireless Security - Similar Threads - Belkin Wireless Security

  2. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  3. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  4. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  5. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  6. Belkin: Changing Wireless Mode

    in XboX Networking Hardware
    Belkin: Changing Wireless Mode: Belkin (Routers): Changing Wireless Mode Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Changing Wireless Mode Open a web browser. In the address bar...
  7. Belkin: Changing the Wireless Channel

    in XboX Networking Hardware
    Belkin: Changing the Wireless Channel: Belkin (Routers): Changing the Wireless Channel Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Changing the Wireless Channel Open a web browser. In...
  8. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not...
  9. Belkin: Change Wireless Band

    in XboX Networking Hardware
    Belkin: Change Wireless Band: Belkin (Routers): Change Wireless Band (Width) Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Change Wireless Band (Width) This device does not have...
  10. Belkin: Changing Wireless Security Type/Disabling

    in XboX Networking Hardware
    Belkin: Changing Wireless Security Type/Disabling: Belkin (Routers): Changing Wireless Security Type/Disabling Login Information Gateway - 192.168.2.1 Username - N/A (None) Password - N/A (None) Changing Wireless Security Type/Disabling...