Draytek: Overview

Discus and support Draytek: Overview in XboX Networking Hardware to solve the problem; Draytek (Modems/Gateways): Overview Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* How... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Aug 4, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Draytek: Overview


    Draytek (Modems/Gateways): Overview
    Draytek- Vigor2500

    Login Information:

    Default Gateway – 192.168.1.1

    Username – *none*

    Password – *none*



    How to Find SSID (Network Name)

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select Wireless LAN Information from under Basic Setup.
    5. Select General Settings from under Detailed Settings.
    6. Your network name can be found in the SSID field.


    How To Find Wireless Passphrase (WPA/WEP)

    *NOTE, The wireless passphrase cannot be viewed, only reset.*

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the OK button.
    4. Select Wireless LAN Information from under Basic Setup.
    5. Select WEP Settings from under Detailed Settings.
    6. Enter your desired key in key 1. It must be 10 digits long and can only use 0-9 and a-f.
    7. Click the OK button once the desired key has been entered.




    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the OK button.
    4. Select Wireless LAN Information from under Basic Setup.
    5. Select WEP Settings from under Detailed Settings.
    6. Select Disable in the WEP Encryption drop down.
    7. Click the OK button.




    MAC Filtering

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the OK button.
    4. Select Wireless LAN Information from under Basic Setup.
    5. Select Access Control from under Detailed Settings.
    6. Uncheck the Enable Access Control check box.
    7. Click the OK button.


    Change Wireless Mode

    *This device supports the 802.11b standard only.*





    Change Wireless Channel

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select General Settings under Detailed Settings.
    5. Select the Desired channel from the channel drop down. (Channels 1,3,9,11)
    6. Click the OK button.


    DHCP Reservation

    *Not Available*



    UPnP

    I could find no reference of UPnP in the device manual. Device Spec indicates UPnP compatability.

    DMZ

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select Advanced Setup from the Main Menu.
    5. Select NAT Setup.
    6. Select DMZ Host Setup.
    7. Check the Enable box.
    8. Click the Choose PC button and select the Xbox from the resulting window. Or enter the IP Address of your Xbox console.
    9. Click the OK button.


    Disable DMZ

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select Advanced Setup from the Main Menu.
    5. Select NAT Setup.
    6. Select DMZ Host Setup.
    7. Uncheck the Enable box.
    8. Click the OK button.


    Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select NAT Setup in the Advanced Setup Section.
    5. Select Open Ports Setup.
    6. Click on the number of the next available Index.
    7. Check the Enable Open Ports box.
    8. Enter “Xbox Live” in the comment field.
    9. Click the Choose PC button and choose the Xbox from the resulting list.
    10. Set Protocol to Both. If both is not available two rules will need to be created one UDP and the other TCP.
    11. Set both the Start Port and End Port to 3074.
    12. Click the OK button.


    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select NAT Setup in the Advanced Setup Section.
    5. Select Open Ports Setup.
    6. Click the Index number next to the rule that was created.
    7. Click the Clear All button.
    8. Click the OK button.


    Firewall

    *The firewall does not have any adjustable options.*



    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select System Management from the Main Menu.
    5. Select Reboot System.
    6. Select Using factory default configuration.
    7. Click the OK button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.


    How to Find Firmware Version

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. The firmware version is listed at the top of the screen to the right of Firmware.


    Firmware Update

    1. Obtain the updated firmware file either from your ISP or Draytek.
    2. Open a web browser.
    3. Enter http://192.168.1.1 (or click the link).
    4. Click the Ok button.
    5. Select System Management from the main menu.
    6. Select Firmware Upgrade.
    7. Follow the onscreen instructions to complete this action using an FTP Client.




    Bridging Guide

    1. Open a web browser.
    2. Enter http://192.168.1.1 (or click the link).
    3. Click the Ok button.
    4. Select Quick Setup.
    5. Select Internet Access Setup.
    6. Select PPPoE/PPPoA.
    7. Set PPPoE/PPPoA Client to Disable.
    8. Select 1483 Bridged IP LLC in the Encapsulation drop down.
    9. Click the OK button.




    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues

    There are no known issues at this time.

    Device Manual

    Click
    here
    for the manual.

    :)
     
    XBR Poseidon, Aug 4, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Draytek: DHCP Reservation

    Draytek (Modems/Gateways): DHCP Reservation
    Draytek- Vigor2500

    Login Information:

    Default Gateway – 192.168.1.1

    Username – *none*

    Password – *none*



    DHCP Reservation

    *Not Available*
     
    XBR Poseidon, Aug 4, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Draytek: Known Issues

    Draytek (Modems/Gateways): Known Issues
    Draytek- Vigor2500

    Login Information:

    Default Gateway – 192.168.1.1

    Username – *none*

    Password – *none*



    Known Issues

    There are no known issues at this time.
     
    XBR Poseidon, Aug 4, 2014
    #3
  4. GMAN990 Win User

    My NAT type is open but I still can't connect to some people?

    Hi,

    I can see a reply button ok ? I assume the Draytek is connect to your phone line and the Netgear is connected to the Draytek via an Ethernet cable and your Xbox into the Netgear?



    Using two routers is certainly an issue, why do you need the netgear?
  5. GMAN990 Win User

    My NAT type is open but I still can't connect to some people?

    Hi,



    Well your issue is almost certainly down to the two router set-up, I take it your Xbox is connected to the Netgear, is it possible to connect it to the Draytek instead? You say that you need wireless can't you just replace the Draytek with an ADSL wireless
    router?
  6. GMAN990 Win User

    My NAT type is open but I still can't connect to some people?

    Well that is certainly the issue as you are double NATing. To make this work you would have to make quite a few changes to the Netgear.



    You would have to turn off NAT and DHCP, and give the Netgear an ip address in the same range as the Draytek and also plug the cable coming from the Draytek into one of the LAN ports of the Netgear instead of the WAN port (I assume its connected to the WAN
    port at the moment)



    It just gets a bit complicated really, don't you have a phone line close to you to you could swap the positions of the Draytek and Netgear as this NAT issue will only really affect gaming for Xbox PS3 etc, it won't affect browsing/email/msn etc



    If you could plug into the Draytek you'd be fine
  7. JamieCross Win User

    Xbox One - WiFi Issues.

    Hi, Sorry the Xbox Troubleshooting steps do not work. I have a Draytek Vigor 2900
  8. Skylaaa Win User

    My NAT type is open but I still can't connect to some people?

    Nah, the draytek is the other side of the house, and both the routers are wireless, we just need to use both to be able to get the internet anywhere
Thema:

Draytek: Overview

Loading...
  1. Draytek: Overview - Similar Threads - Draytek Overview

  2. Draytek Draytek- Vigor2500: Xbox one lag and freezing issues

    in XboX Networking Hardware
    Draytek Draytek- Vigor2500: Xbox one lag and freezing issues: Draytek (Modems/Gateways) Draytek- Vigor2500: Xbox one lag and freezing issues Contact your ISP, I do not feel that it comes from your console. You can try with the Xbox support to have more info:...
  3. Draytek Draytek- Vigor2500: Xbox One hinter WAN Router mit zwei Firtzboxen als Modem - [Edit - ...

    in XboX Networking Hardware
    Draytek Draytek- Vigor2500: Xbox One hinter WAN Router mit zwei Firtzboxen als Modem - [Edit - ...: Draytek (Modems/Gateways) Draytek- Vigor2500: Xbox One hinter WAN Router mit zwei Firtzboxen als Modem (Ports öffnen) - [Edit - Translation] - Xbox One behind WAN router with two Firtzboxen as a...
  4. Draytek: Known Issues

    in XboX Networking Hardware
    Draytek: Known Issues: Draytek (Modems/Gateways): Known Issues Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* Known Issues There are no known issues at...
  5. Draytek: Multiple Console Support

    in XboX Networking Hardware
    Draytek: Multiple Console Support: Draytek (Modems/Gateways): Multiple Console Support Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* Multiple Console Support We...
  6. Draytek: Bridging Guide

    in XboX Networking Hardware
    Draytek: Bridging Guide: Draytek (Modems/Gateways): Bridging Guide Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* Bridging Guide Open a web browser....
  7. Draytek: Firmware

    in XboX Networking Hardware
    Draytek: Firmware: Draytek (Modems/Gateways): Firmware Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* How to Find Firmware Version Open a web...
  8. Draytek: Restoring Factory Defaults

    in XboX Networking Hardware
    Draytek: Restoring Factory Defaults: Draytek (Modems/Gateways): Restoring Factory Defaults Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* Restoring Factory Defaults...
  9. Draytek: Firewall

    in XboX Networking Hardware
    Draytek: Firewall: Draytek (Modems/Gateways): Firewall Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* Firewall *The firewall does not have any...
  10. Draytek: Port Forwarding

    in XboX Networking Hardware
    Draytek: Port Forwarding: Draytek (Modems/Gateways): Port Forwarding Draytek- Vigor2500 Login Information: Default Gateway – 192.168.1.1 Username – *none* Password – *none* Port Forwarding Open a web browser....