Fritz!Box: DMZ

Discus and support Fritz!Box: DMZ in XboX Networking Hardware to solve the problem; Fritz!Box (Modems/Gateways): DMZ Fritz!Box 7272 Login Information Gateway: Web Server's Default Page Username: admin Password: password DMZ... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Oct 9, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Fritz!Box: DMZ


    Fritz!Box (Modems/Gateways): DMZ
    Fritz!Box 7272

    Login Information



    DMZ

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select Internet from the menu on the left.
    5. Select Permit Access from the resulting sub-menu.
    6. Select the Port Forwarding tab.
    7. Click the New Port Forwarding button.
    8. Select Exposed Host from the Port Forwarding Enabled for.
    9. Select your Xbox console.
    10. Click the OK button to save the changes.


    Disable DMZ

    1. Connect a computer to the gateway with an Ethernet cable.
    2. Open a web browser on a computer.
    3. Type the gateway address, Web Server's Default Page into the web address bar, hit enter.
    4. Select Internet from the menu on the left.
    5. Select Permit Access from the resulting sub-menu.
    6. Select the Port Forwarding tab.
    7. Click the red X button next to the Exposed host entry.

    :)
     
    XBR Poseidon, Oct 9, 2014
    #1
  2. BobMcFly247
    BobMcFly247 Guest
    Set static IP, Xbox changes IP right back. Thus preventing me from connecting.

    Additional information:

    DMZ is called "exposed host" in the Fritz Box.
     
    BobMcFly247, Oct 9, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Fritz!Box: DMZ

    Fritz!Box (Modems/Gateways): DMZ
    Fritz!Box 7390

    Login Information:

    Default Gateway – Web Server's Default Page

    Username – there is no username or password unless one is set by the user.

    Password –



    DMZ

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Click the "Port Forwarding" tab.
    6. Click "New Port Forwarding".
    7. Select the "Exposed Host" entry from the drop-down menu "Port forwarding enabled for".
    8. Select the network device (for example a computer) for which you wish to enable port forwarding




    Disable DMZ

    1. Open a web browser.
    2. Enter Web Server's Default Page in the address bar. (Or click the link). A username and password is not needed by default. If one was created you will need to enter it here.
    3. Click "Internet".
    4. Click "Permit Access" in the "Internet" menu.
    5. Delete the entry for the Xbox console by clicking the red X to the right.
     
    XBR Poseidon, Oct 9, 2014
    #3
  4. BobMcFly247 Win User

    Set static IP, Xbox changes IP right back. Thus preventing me from connecting.

    Additional information:

    DMZ is called "exposed host" in the Fritz Box.
  5. SenTinaL Oz Win User

    Known Issues

    I have noticed there is a newer Firmware for the 7390 listed, but it is German ... would this be ok for an Australian Fritz?

    FRITZ.Box_Fon_WLAN_7390.AnnexB.84.06.00.image 24-Oct-2013 10:15 15M

    ". FRITZ.Box_Fon_WLAN_7390 image *" containing the update file in this directory

    the current firmware (system software) for Box Fon WLAN 7390th

    Caution: This firmware is only for FRITZ Box Fon WLAN 7390 suitable!

    Product: FRITZ Box Fon WLAN 7390!

    Version: FRITZ OS 6.00 (84.06.00)

    Language: German

    Release date: 28/10/2013
  6. XBF Brad A Win User

    Fritz BOx

    Hi there Trained,

    Thanks for reaching out. I'm sorry to hear about the issue with the network connectivity on the Xbox One X.

    I recommend to try Clearing the Mac addresses on the Xbox.

    Check out these articles: Network settings on Xbox Oneand
    I get an error message when I run the ‘Test network connection’ on Xbox One.

    Try this:

    • Select Settings on the Xbox
    • Select Network
    • Select Network Settings
    • Select Advance Settings
    • Alternate Mac address
    • Select Clear
    • Select Restart

    This step will restart the console. When it reboots, Select Network >Select Network Settings > Set up wireless network.

    Try this out and let us know the results.

    Thanks,

    Brad
  7. ian rush-47D8E064-17 Win User

    Additional Network Ports for Multiplayer Gaming: PORT 3544 NOT REPLYING.... TEREDO IP ADDRESS

    THIS FIXED THE PROBLEM ON MY ROUTER

    Disabling the Teredo filter in the FRITZ!Box
    1. Click "Internet" in the FRITZ!Box user interface.
    2. Click "Filters" in the "Internet" menu.
    3. Click on the "Lists" tab.
    4. Disable the option "Teredo filter enabled".
    5. Click "Apply" to save the settings.
  8. taidara Win User

    Can't play Destiny, NAT Strikt, can't connect to teredo ip HEEEEELP!!!

    Great stuff!

    Thanks to both of you, for sharing the information, in regard to the Fritz!Box.
Thema:

Fritz!Box: DMZ

Loading...
  1. Fritz!Box: DMZ - Similar Threads - Fritz Box DMZ

  2. : Fritz!Box 6490 cable - UPnP not workling properly

    in XboX Networking Hardware
    : Fritz!Box 6490 cable - UPnP not workling properly: : Fritz!Box 6490 cable - UPnP not workling properly hm, i think its an isp or server problem not on your side. 6998055c-09f4-4299-ab97-efc998ca42a8
  3. Fritz BOx

    in XBoX on Consoles
    Fritz BOx: Hallo ich kann mich über meine Fritzbox nicht mit der Xbox wia w-lan verbinden [translation-Hello I can't connect to the Xbox via w-lan via my Fritzbox] fe4b5333-e944-4173-a1b3-982ddea7ea3d
  4. Fritz!Box: DMZ

    in XboX Networking Hardware
    Fritz!Box: DMZ: Fritz!Box (Modems/Gateways): DMZ Fritz!Box 7490 Login Information Gateway: Web Server's Default Page Username: admin Password: password *There have been reports that this device does not...
  5. Fritz!Box: DMZ

    in XboX Networking Hardware
    Fritz!Box: DMZ: Fritz!Box (Modems/Gateways): DMZ Fritz!Box 7390 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the user....
  6. Fritz!Box: DMZ

    in XboX Networking Hardware
    Fritz!Box: DMZ: Fritz!Box (Modems/Gateways): DMZ Fritz!Box 7360 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the user....
  7. Fritz!Box: DMZ

    in XboX Networking Hardware
    Fritz!Box: DMZ: Fritz!Box (Modems/Gateways): DMZ Fritz!Box 7330 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the user....
  8. Fritz!Box: DMZ

    in XboX Networking Hardware
    Fritz!Box: DMZ: Fritz!Box (Modems/Gateways): DMZ Fritz!Box 3390 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the user....
  9. Fritz!Box: DMZ

    in XboX Networking Hardware
    Fritz!Box: DMZ: Fritz!Box (Modems/Gateways): DMZ Fritz!Box 3370 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by the user....
  10. Fritz!Box FRITZ!Box 3272: DMZ

    in XboX Networking Hardware
    Fritz!Box FRITZ!Box 3272: DMZ: Fritz!Box (Modems/Gateways) FRITZ!Box 3272: DMZ Fritz!Box 3272 Login Information: Default Gateway – Web Server's Default Page Username – there is no username or password unless one is set by...