Linksys: Firmware Update

Discus and support Linksys: Firmware Update in XboX Networking Hardware to solve the problem; Linksys (Routers): Firmware Update Login Information Gateway: 192.168.0.1 Username: leave blank Password: admin How To Find Firmware Version... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Aug 15, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Linksys: Firmware Update


    Linksys (Routers): Firmware Update
    Login Information



    • Gateway: 192.168.0.1
    • Username: leave blank
    • Password: admin
    How To Find Firmware Version

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Status" from the menu at the top.
    5. Select "Router" from the sub menu.
    6. The firmware version will be labeled as "Firmware Version".
    Firmware Update

    Note: You will need to download firmware form the manufacturer’s website before you begin this process.


    1. Connect the computer to one of the LAN ports on the router via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. When prompted to login, leave the user name blank and type in “admin” for the password.
    5. Select "Administration" from the menu at the top.
    6. Select "Firmware Upgrade" from the sub menu.
    7. Select the “Browse” button. Locate the firmware file you downloaded and click ok.
    8. Once the file has added select the “Upgrade” button. The device will begin the update process, do not interrupt the process wait for the update to finish. The device will reboot once its finished.

    :)
     
    XB1R Hydros, Aug 15, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Linksys: Firmware Update

    Linksys (Routers): Firmware Update
    Login Information

    • Gateway - 192.168.1.1
    • Username - admin
    • Password - admin




    *Note* If Cisco Connect was used to configure the router then there are several other options for logging in.



    One method is to use Cisco Connect again. To use this, you will have to search for in All Programs in the Start Menu on the computer that you installed the Cisco Connect Software on.



    Once the program has started, click where it says change in the section labeled "Router Settings". Your network name and password are listed on the left in the section titled Personalize. From here you can update this information should you choose to by
    clicking on change.



    The second method is through a web based utility that you can access through Cisco Connect. To access the web based utility, Choose router settings from the main Cisco Connect menu. Then from the section on the right, click on Advanced Settings. There will
    be a warning that will come up, telling you that this web utility is for expert use only. Click “OK” on this screen.

    How to Find Firmware Version

    1. Open a web browser.
    2. Log into the router by entering the default gateway(192.168.1.1) into the address bar of an internet browser.
    3. When prompted, enter in "admin" for the user name and "admin" for the password.

      *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
    4. From the menu at the top, click on Status.
    5. The firmware version is listed at the top of this page.


    Firmware Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of an internet browser.
    4. When prompted, enter in "admin" for the user name and "admin" for the password.

      *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
    5. Select Administration at the top.
    6. Click Firmware Upgrade from the sub-menu.
    7. In an alternate web browser or tab go to
      www.Linksys.com
      and download the updated software.
    8. Click Browse.
    9. Locate and select the file you just downloaded and uncompressed.
    10. Click Start Update to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router
      finishes restarting! Wait a few more seconds before doing anything.
    11. Click Status at the top and check the Firmware Version to verify that your router now has the new software installed.
     
    XBR Poseidon, Aug 15, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Linksys: Firmware Update

    Linksys (Routers): Firmware Update
    Login Information

    • Gateway - 192.168.1.1
    • Username - empty
    • Password - admin

    How To Find Firmware Version

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    4. By default leave the user name and enter in "admin" for the password.
    5. From the menu at the top, click on status.


    Update Firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    4. By default leave the user name and enter in "admin" for the password.
    5. Select Administration at the menu at the top.
    6. Click Firmware Upgrade from the sub-menu.
    7. In an alternate web browser or tab go to
      www.Linksys.com
      and download the updated software.
    8. Click Browse.
    9. Locate and select the file you just downloaded and uncompressed.
    10. Click "Start Update" to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router
      finishes restarting! Wait a few more seconds before doing anything.
    11. Click Status at the top and check the Firmware Version to verify that your router now has the new software installed.
     
    XBR Poseidon, Aug 15, 2014
    #3
  4. demenace Win User

    Problem connecting to friend (we both have open NAT)

    Linksys routers and Surfboard modems typically work well together. You should not have an issue there.

    You should update the firmware in your Linksys router and make sure it has UPnP enabled.
  5. JAMM2608 Win User

    EA7500/MAC address

    Ha d the exact same issue with the same router. I found out that Linksys released a firmware update that, for some reason, made it incompatible with the Xbox. I reverted to a previous firmware version on the router, and the issue was solved. However, I'm
    not sure as to whether or not Microsoft or Linksys has resolved this compatibility issue.
  6. Zwakenberg Win User

    Moderate NAT Type and network behind a upnp port restricted nat

    Hi,

    I unticked the box and I recently updated my firmware on my Linksys.

    The Ubee evw321b is operating in bridge mode.
  7. gds1972 Win User

    Xbox One X having trouble starting downloads

    Hi

    Have you looked on the Linksys website for a firmware update for your router just incase there is one and this resolves your problems?
  8. VibroPlex Win User

    Two people in the same house trying to connect to xbox live, but can't

Thema:

Linksys: Firmware Update

Loading...
  1. Linksys: Firmware Update - Similar Threads - Linksys Firmware Update

  2. Linksys: My xbox's connection issue...

    in XboX Networking Hardware
    Linksys: My xbox's connection issue...: Linksys (Modems/Gateways): My xbox's connection issue... How many other devices are connected to that router? You may have to go into the settings of the router & prioritize the devices....
  3. Linksys: xbox turns off by itself..won't connect to hdmi

    in XboX Networking Hardware
    Linksys: xbox turns off by itself..won't connect to hdmi: Linksys (Modems/Gateways): xbox turns off by itself..won't connect to hdmi Hello feliciahill1, Thank you for posting on the Xbox forums. We recommend utilizing the article entitled, "Troubleshoot...
  4. Linksys Linksys WRT320N: Xbox live connection

    in XboX Networking Hardware
    Linksys Linksys WRT320N: Xbox live connection: Linksys (Routers) Linksys WRT320N: Xbox live connection Looks like a problem with the system update. Here is a link to help try the update from the start. Status Code 8007-2AF9 | Error Code...
  5. Linksys Linksys BEFCMU10 v3: Can’t connect Xbox live

    in XboX Networking Hardware
    Linksys Linksys BEFCMU10 v3: Can’t connect Xbox live: Linksys (Modems/Gateways) Linksys BEFCMU10 v3 (Modem): Can’t connect Xbox live Please check link Restore to Factory Defaults | Xbox One 76d4c962-762c-48b2-94ba-1077e85c1eb7
  6. Linksys Linksys WGA54G: Suppression de gold prélèvements

    in XboX Networking Hardware
    Linksys Linksys WGA54G: Suppression de gold prélèvements: Linksys (Powerline Adapters) Linksys WGA54G: Suppression de gold prélèvements Désolé de l'entendre. Si votre fils a un abonnement récurrent, vous devez vous connecter son compte ou au compte...
  7. Linksys: Firmware

    in XboX Networking Hardware
    Linksys: Firmware: Linksys (Routers): Firmware Login Information Gateway: 192.168.0.1 Username: user Password: (provided by the ISP) (or left blank) How to Find Firmware Version Open a web browser. Log into...
  8. Linksys: Firmware Update

    in XboX Networking Hardware
    Linksys: Firmware Update: Linksys (Routers): Firmware Update Linksys EA6500 Login Information Username - admin Password - admin Gateway - 192.168.1.1 Firmware Update Automatic Open a web browser. Log into...
  9. Linksys: How to Find Firmware Version

    in XboX Networking Hardware
    Linksys: How to Find Firmware Version: Linksys (Routers): How to Find Firmware Version Linksys EA6500 Login Information Username - admin Password - admin Gateway - 192.168.1.1 How to Find Firmware Version Open a web...
  10. Linksys EA6400 only shows one xbox in device list

    in XBoX on Consoles
    Linksys EA6400 only shows one xbox in device list: I have a linksys EA 6400 router with 2 xbox consoles connected to it via cat 5e cable. Both wires go through separate switches between the router and the xbox consoles. When both consoles are...