Linksys: Overview

Discus and support Linksys: Overview in XboX Networking Hardware to solve the problem; Linksys (Routers): Overview Login Information Gateway: 192.168.0.1 Username: leave blank Password: admin How To Find SSID (Network Name) Open a... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Aug 15, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Linksys: Overview


    Linksys (Routers): Overview
    Login Information

    • Gateway: 192.168.0.1
    • Username: leave blank
    • Password: admin
    How To Find SSID (Network Name)

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Basic Wireless Settings" from the sub menu.
    6. The wireless network name will be labeled as "Wireless Network Name (SSID)".


    How to Find Wireless Passphrase (WPA/WEP)

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Wireless Security" from the sub menu.
    6. The wireless passphrase will be labeled as "Shared Key".


    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Wireless Security" from the sub menu.
    6. Select the desired security type from the "Security Mode" drop down menu. (To disable the security, select "Disable".)
    7. Select Save Settings


    MAC Filtering

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Wireless MAC Filter" from the sub menu.
    6. Select the radio button labeled "Disable" for the "Wireless MAC Filter" option.
    7. Select Save Settings.




    Change Wireless Channel 

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Basic Wireless Settings" from the sub menu.
    6. Select the desired wireless channel from the "Wireless Channel" drop down menu.
    7. Select Save Settings.




    Change Wireless Mode 

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Basic Wireless Settings" from the sub menu.
    6. Select the desired wireless mode from the "Wireless Network Mode" drop down menu.
    7. Select Save Settings.


    Change Wireless Band (Width)

    This device does not have this feature.



    UPnP

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Administration" from the menu at the top.
    5. Select "Management" from the sub menu.
    6. Select the radio button for either "Enabled" or "Disabled", based on current configuration.
    7. Select Save Settings.


    DHCP Reservation

    This feature is not available on this device.



    DMZ

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "DMZ" from the sub menu.
    6. Select the radio button for "Enabled".
    7. Enter the last digit(s) of the IP address on the Xbox in the "DMZ Host IP Address" field.
    8. Select Save Settings.


    Disable DMZ

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "DMZ" from the sub menu.
    6. Select the radio button for "Disabled".
    7. Select Save Settings.


    Port Forwarding

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "Port Range Forwarding" from the sub menu.
    6. Locate the first available row.
    7. Enter "Xbox" into the "Application" column.
    8. Enter 3074 into both the "Start" and "End" columns.
    9. Select "Both" from the "Protocol" column drop down menu.
    10. Enter the last digit(s) of the IP address on the Xbox into the "IP Address" column.
    11. Check the "Enable" check box.
    12. Select Save Settings.


    Disable Port Forwarding

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "Port Range Forwarding" from the sub menu.
    6. Locate the desired port forwarding rule.
    7. Uncheck the "Enable" check box.
    8. Select Save Settings.


    Entering PPPoE

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Setup" from the menu at the top.
    5. Select "Basic Setup" from the sub menu.
    6. Select "PPPoE" from the "Internet Connection Type" drop down menu.
    7. Enter the PPPoE User Name and Password provided by your internet service provider.
    8. Select the "Keep Alive" radio button.
    9. Select Save Settings.


    Firewall

    There are no additional firewall settings on this device.



    How To Find Firmware Version

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Status" from the menu at the top.
    5. Select "Router" from the sub menu.
    6. The firmware version will be labeled as "Firmware Version".


    Firmware Update

    Note: You will need to download firmware form the manufacturer’s website before you begin this process.


    1. Connect the computer to one of the LAN ports on the router via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. When prompted to login, leave the user name blank and type in “admin” for the password.
    5. Select "Administration" from the menu at the top.
    6. Select "Firmware Upgrade" from the sub menu.
    7. Select the “Browse” button. Locate the firmware file you downloaded and click ok.
    8. Once the file has added select the “Upgrade” button. The device will begin the update process, do not interrupt the process wait for the update to finish. The device will reboot once its finished.


    Restore Factory Defaults

    Through Firmware

    1. Connect the computer to one of the LAN ports on the router via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    4. When prompted to login, leave the user name blank and type in “admin” for the password.
    5. Select "Administration" from the menu at the top.
    6. Select "Factory Defaults" from the sub menu.
    7. Select the "Yes" radio button "Restore Router Factory Defaults". (You may also select "Yes" for "Restore Voice Factory Defaults" if you would like to restore the VOIP settings as well.)
    8. Select Save Settings.


    Through Hardware 

    1. Connect the computer to one of the LAN ports on the router via an Ethernet cable.
    2. Locate the "Reset" button on the device.
    3. Using a toothpick/pen/paper clip, press and hold the button for 30 seconds.


    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues

    There are no known issues for this device.



    Device Manual

    Click
    here
    to go to a manual for this device.

    :)
     
    XB1R Hydros, Aug 15, 2014
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    Linksys: Overview

    Linksys (Routers): Overview
    Login Information



    • Gateway: 192.168.1.1
    • Username: *leave blank*
    • Password: admin






    How To Find SSID (Network Name)



    This device is not capable of wireless.





    How to Find Wireless Passphrase (WPA/WEP)



    This device is not capable of wireless.





    Changing Wireless Security Type/ Disabling Wireless Security



    This device is not capable of wireless.





    Change Wireless Channel



    This device is not capable of wireless.





    Change Wireless Mode



    This device is not capable of wireless.



    Change Wireless Band (Width)

    This device is not capable of wireless.



    UPnP



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Password" from the menu at the top.
    5. Select the radio button next to "UPnP Services" for either "Enable" or "Disable", based on current configuration.
    6. Select Save.




    DHCP Reservation



    This feature is not available on this device.





    DMZ



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Advanced Setup" from the menu at the top.
    5. Select "DMZ Host" from the new menu at the top.
    6. Enter the last digit(s) of the IP address on the Xbox in the "DMZ Host IP Address" box.
    7. Select Apply.




    Disable DMZ



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Advanced Setup" from the menu at the top.
    5. Select "DMZ Host" from the new menu at the top.
    6. Enter "0" into the "DMZ Host IP Address" box.
    7. Select Apply.




    Port Forwarding



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Advanced Setup" from the menu at the top.
    5. Select "Forwarding" from the new menu at the top.
    6. Enter "Xbox" in the first available row under the "Customized Applications" column.
    7. Enter 3074 into both the "Ext. Port" and the "Int. Port" columns.
    8. Check both the "Protocol TCP" and the "Protocol UDP" check boxes.
    9. Enter the last digit(s) of the IP address on the Xbox in the "IP Address" column.
    10. Check the "Enable" check box.
    11. Select Apply.




    Disable Port Forwarding



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Advanced Setup" from the menu at the top.
    5. Select "Forwarding" from the new menu at the top.
    6. Locate the port forwarding rule to be disabled.
    7. Uncheck the "Enable" check box.
    8. Select Apply.




    MAC Filtering



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Advanced Setup" from the menu at the top.
    5. Select "Filters" from the new menu at the top.
    6. Select "Edit MAC Filter Settings".
    7. Select "0) 1~10" from the "Filtered MAC Address" drop down menu.
    8. Delete any entries from "mac 1" through "mac 10".
    9. Select Apply.
    10. Select Apply again.




    Entering PPPoE



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Setup" from the menu at the top.
    5. Select "PPPoE" from the "WAN connection Type" drop down box.
    6. Enter the PPPoE user name and the password provided by the internet services provider.
    7. Select the radio button for "Keep Alive".
    8. Select Apply.




    Firewall



    There are no additional firewall features on this device.





    How To Find Firmware Version



    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    3. When prompted, leave the user name blank and enter "admin" for the password.
    4. Select "Status" from the menu at the top.
    5. The firmware version will be labeled as "Firmware Version".




    Firmware Update



    Due to the age of this device, the firmware is no longer available.





    Restore Factory Defaults



    Through Firmware



    1. Plug the computer directly into the devices LAN port via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.1.1) into the address bar of the internet browser.
    4. When prompted, leave the user name blank and enter "admin" for the password.
    5. Select "Password" from the menu at the top.
    6. Select the radio button for "Yes" next to "Restore Factory Defaults".
    7. Select Save.




    Through Hardware



    1. Plug the computer directly into the devices LAN port via an Ethernet cable.
    2. Locate the "Reset" button on the device.
    3. Using a toothpick/pen/paper clip, press and hold the button for 15 seconds.




    Multiple Console Support



    We have confirmed that this network device is unable to support more than one console with an Open NAT.





    Known Issues



    This device is not capable of wireless.





    Device Manual



    There is currently no manual available for this device.
     
    XB1R Apollo, Aug 15, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Linksys: Overview

    Linksys (Routers): Overview
    Login Information

    • Gateway: 192.168.15.1
    • Username: admin
    • Password: admin

    How To Find SSID (Network Name)

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Basic Wireless Settings" from the sub menu.
    6. The wireless network name will be labeled as "Wireless Network Name (SSID)".

    How to Find Wireless Passphrase (WPA/WEP)

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Wireless Security" from the sub menu.
    6. The wireless passphrase will be labeled as "Shared Key".

    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Wireless Security" from the sub menu.
    6. Select the desired security type from the "Security Mode" drop down menu. (To disable the security, select "Disable".)
    7. Select Save Settings

    Change Wireless Channel 

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Basic Wireless Settings" from the sub menu.
    6. Select the desired wireless channel from the "Wireless Channel" drop down menu.
    7. Select Save Settings.



    Change Wireless Mode 

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Basic Wireless Settings" from the sub menu.
    6. Select the desired wireless mode from the "Wireless Network Mode" drop down menu.
    7. Select Save Settings.

    Change Wireless Band (Width)

    This router only supports the 20MHz band.

    UPnP

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Administration" from the menu at the top.
    5. Select "Management" from the sub menu.
    6. Select the radio button for either "Enabled" or "Disabled", based on current configuration.
    7. Select Save Settings.

    DHCP Reservation

    This feature is not available on this device.

    DMZ

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "DMZ" from the sub menu.
    6. Select the radio button for "Enabled".
    7. Enter the last digit(s) of the IP address on the Xbox in the "DMZ Host IP Address" field.
    8. Select Save Settings.

    Disable DMZ

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "DMZ" from the sub menu.
    6. Select the radio button for "Disabled".
    7. Select Save Settings.

    Port Forwarding

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "Port Range Forwarding" from the sub menu.
    6. Locate the first available row.
    7. Enter "Xbox" into the "Application" column.
    8. Enter 3074 into both the "Start" and "End" columns.
    9. Select "Both" from the "Protocol" column drop down menu.
    10. Enter the last digit(s) of the IP address on the Xbox into the "IP Address" column.
    11. Check the "Enable" check box.
    12. Select Save Settings.

    Disable Port Forwarding

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Applications & Gaming" from the menu at the top.
    5. Select "Port Range Forwarding" from the sub menu.
    6. Locate the desired port forwarding rule.
    7. Uncheck the "Enable" check box.
    8. Select Save Settings.

    MAC Filtering

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Wireless" from the menu at the top.
    5. Select "Wireless MAC Filter" from the sub menu.
    6. Select the radio button labeled "Disable" for the "Wireless MAC Filter" option.
    7. Select Save Settings.

    Entering PPPoE

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Setup" from the menu at the top.
    5. Select "Basic Setup" from the sub menu.
    6. Select "PPPoE" from the "Internet Connection Type" drop down menu.
    7. Enter the PPPoE User Name and Password provided by your internet service provider.
    8. Select the "Keep Alive" radio button.
    9. Select Save Settings.

    Firewall

    There are no additional firewall settings on this device.

    How To Find Firmware Version

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    3. When prompted, enter "admin" for the user name and "admin" for the password.
    4. Select "Status" from the menu at the top.
    5. Select "Router" from the sub menu.
    6. The firmware version will be labeled as "Firmware Version".

    Firmware Update

    This feature is not available on this device.

    Restore Factory Defaults

    Through Firmware

    1. Connect the computer to one of the LAN ports on the router via an Ethernet cable.
    2. Open a web browser.
    3. Log into the router by entering the default gateway (192.168.15.1) into the address bar of the internet browser.
    4. When prompted, enter "admin" for the user name and "admin" for the password.
    5. Select "Administration" from the menu at the top.
    6. Select "Factory Defaults" from the sub menu.
    7. Select the "Yes" radio button "Restore Router Factory Defaults". (You may also select "Yes" for "Restore Voice Factory Defaults" if you would like to restore the VOIP settings as well.)
    8. Select Save Settings.

    Through Hardware 

    1. Connect the computer to one of the LAN ports on the router via an Ethernet cable.
    2. Locate the "Reset" button on the device.
    3. Using a toothpick/pen/paper clip, press and hold the button for 30 seconds.

    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.

    Known Issues

    There are no known issues for this device.

    Device Manual

    Click
    here
    to go to a manual for this device.
     
    XB1R Apollo, Aug 15, 2014
    #3
  4. Megavolt480 Win User

    wired connection wont work with new router

    This takes you to the overview of the Linksys E2500 router on the Xbox support page. Here are some configuration settings you may need to modify on the router in order to get it to work. When you switched routers, did you reset the cable modem?

    forums.xbox.com/.../365373.aspx
  5. SnakyToast2841 Win User

    Overview

    Clear your system Cache by holding the power button for 15 seconds, then unplug your Xbox One for 1 minute, after forwarding ports 53,80,88,500,3074,3544,4500.
  6. cookieater821 Win User

    Overview

    BRIDGE mode is under LAN setting routed with NAT and routed without NAT or select BRDIGE MODE. Don't forget to click APPLY then power cycle gateway -
  7. mermaidbythesea-A337 Win User

    Overview

    [quote user="XB1R Athena"]

    Internet service type: 3G/4G



    Common devices:

    Sierra Wireless: Overdrive Pro

    Sierra Aircard: 250U



    ISP Website: http://sprint.com



    Support number: 1-888-211-4727

    [/quote]
  8. JackCrilly Win User

    Overview

    My model name is different from the ones listed
Thema:

Linksys: Overview

Loading...
  1. Linksys: Overview - Similar Threads - Linksys Overview

  2. Linksys: My xbox's connection issue...

    in XboX Networking Hardware
    Linksys: My xbox's connection issue...: Linksys (Modems/Gateways): My xbox's connection issue... How many other devices are connected to that router? You may have to go into the settings of the router & prioritize the devices....
  3. Linksys: xbox turns off by itself..won't connect to hdmi

    in XboX Networking Hardware
    Linksys: xbox turns off by itself..won't connect to hdmi: Linksys (Modems/Gateways): xbox turns off by itself..won't connect to hdmi Hello feliciahill1, Thank you for posting on the Xbox forums. We recommend utilizing the article entitled, "Troubleshoot...
  4. Linksys Linksys WRT320N: Xbox live connection

    in XboX Networking Hardware
    Linksys Linksys WRT320N: Xbox live connection: Linksys (Routers) Linksys WRT320N: Xbox live connection Looks like a problem with the system update. Here is a link to help try the update from the start. Status Code 8007-2AF9 | Error Code...
  5. Linksys Linksys BEFCMU10 v3: Can’t connect Xbox live

    in XboX Networking Hardware
    Linksys Linksys BEFCMU10 v3: Can’t connect Xbox live: Linksys (Modems/Gateways) Linksys BEFCMU10 v3 (Modem): Can’t connect Xbox live Please check link Restore to Factory Defaults | Xbox One 76d4c962-762c-48b2-94ba-1077e85c1eb7
  6. Linksys Linksys WGA54G: Suppression de gold prélèvements

    in XboX Networking Hardware
    Linksys Linksys WGA54G: Suppression de gold prélèvements: Linksys (Powerline Adapters) Linksys WGA54G: Suppression de gold prélèvements Désolé de l'entendre. Si votre fils a un abonnement récurrent, vous devez vous connecter son compte ou au compte...
  7. Linksys Linksys EA6500: Problems with Linksys EA8300

    in XboX Networking Hardware
    Linksys Linksys EA6500: Problems with Linksys EA8300: Linksys (Routers) Linksys EA6500: Problems with Linksys EA8300 I have a brand spanking new Linksys EA8300 router. Was working fine with both of my Xbox's and all other home devices until today...
  8. Linksys: Overview

    in XboX Networking Hardware
    Linksys: Overview: Linksys (Routers): Overview Login Information Gateway: 192.168.0.1 Username: user Password: (provided by the ISP) (or left blank) How to Find SSID (Network Name) This feature is...
  9. Linksys: Overview

    in XboX Networking Hardware
    Linksys: Overview: Linksys (Routers): Overview Linksys EA6500 Login Information Username - admin Password - admin Gateway - 192.168.1.1 *Note* If Cisco Connect was used to configure the router then...
  10. Linksys EA6400 only shows one xbox in device list

    in XBoX on Consoles
    Linksys EA6400 only shows one xbox in device list: I have a linksys EA 6400 router with 2 xbox consoles connected to it via cat 5e cable. Both wires go through separate switches between the router and the xbox consoles. When both consoles are...