Linksys: UPnP

Discus and support Linksys: UPnP in XboX Networking Hardware to solve the problem; Linksys (Routers): UPnP Login Information Gateway: 192.168.0.1 Username: leave blank Password: admin UPnP Open a web browser. Log into the... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Aug 15, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Linksys: UPnP


    Linksys (Routers): UPnP
    Login Information



    • Gateway: 192.168.0.1
    • Username: leave blank
    • Password: admin
    UPnP

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.0.1) into the address bar of the internet browser.
    3. When prompted to login, leave the user name blank and type in “admin” for the password.
    4. Select "Administration" from the menu at the top.
    5. Select "Management" from the sub menu.
    6. Select the radio button for either "Enabled" or "Disabled", based on current configuration.
    7. Select Save Settings.

    :)
     
    XB1R Hydros, Aug 15, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Linksys: UPnP

    Linksys (Routers): UPnP
    Login Information



    • Gateway - 192.168.1.1
    • Username - admin
    • Password - admin



    *Note* If Cisco Connect was used to configure the router then there are several other options for logging in.



    One method is to use Cisco Connect again. To use this, you will have to search for in All Programs in the Start Menu on the computer that you installed the Cisco Connect Software on.



    Once the program has started, click where it says change in the section labeled "Router Settings". Your network name and password are listed on the left in the section titled Personalize. From here you can update this information should you choose to by
    clicking on change.



    The second method is through a web based utility that you can access through Cisco Connect. To access the web based utility, Choose router settings from the main Cisco Connect menu. Then from the section on the right, click on Advanced Settings. There will
    be a warning that will come up, telling you that this web utility is for expert use only. Click “OK” on this screen.

    UPnP

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of an internet browser.
    3. When prompted, enter in "admin" for the user name and "admin" for the password.

      *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
    4. Select Administration from the menu at the top.
    5. Enable or disable UPnP depending on need.
    6. Select Save Settings.
     
    XBR Poseidon, Aug 15, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Linksys: UPnP

    Linksys (Routers): UPnP
    Login Information

    • Gateway - 192.168.1.1
    • Username - empty
    • Password - admin




    *Note* If Cisco Connect was used to configure the router then there are several other options for logging in.



    One method is to use Cisco Connect again. To use this, you will have to search for in All Programs in the Start Menu on the computer that you installed the Cisco Connect Software on.



    Once the program has started, click where it says change in the section labeled "Router Settings". Your network name and password are listed on the left in the section titled Personalize. From here you can update this information should you choose to by
    clicking on change.



    The second method is through a web based utility that you can access through Cisco Connect. To access the web based utility, Choose router settings from the main Cisco Connect menu. Then from the section on the right, click on Advanced Settings. There will
    be a warning that will come up, telling you that this web utility is for expert use only. Click “OK” on this screen.

    UPnP

    1. Open a web browser.
    2. Log into the router by entering the default gateway (192.168.1.1) into the address bar of an internet browser.
    3. When prompted, enter in "admin" for the user name and "admin" for the password.

      *Note* If Cisco Connect was used to configure the router then the password will be your wireless password.
    4. Select Administration from the menu at the top.
    5. Enable or disable UPnP depending on need.
    6. Select Save Settings.
     
    XBR Poseidon, Aug 15, 2014
    #3
  4. Sneltje P.A.S.C.A.L. Win User

    Linksys: UPnP

    It should be possible to disable the UPnP.

    If not, I would advise you to dubble check with linksys support;

    www.linksys.com/.../support
  5. DynamiteNut87 Win User

    Linksys: UPnP

    I try to log in as admin and us that as well for the password and it's saying that it's wrong. Is there any other way in doing this?
  6. taidara Win User

    Linksys E4200/Bell Modem Open NAT Issue Xbox One

    In regard to UPnP on your Linksys, have it ticked enable.
  7. VibroPlex Win User

    Two people in the same house trying to connect to xbox live, but can't

  8. JeroenBoom Win User

    Help with NAT error on 1 xbox but not the other

    Is there a modem present you received from your ISP? Are the ports open to the linksys IP address? That way you only have to setup uPnP only in your linksys router. Or if you only turn on Upnp in your modem and router that could do the trick also. Give it
    a shot....
Thema:

Linksys: UPnP

Loading...
  1. Linksys: UPnP - Similar Threads - Linksys UPnP

  2. Linksys: My xbox's connection issue...

    in XboX Networking Hardware
    Linksys: My xbox's connection issue...: Linksys (Modems/Gateways): My xbox's connection issue... How many other devices are connected to that router? You may have to go into the settings of the router & prioritize the devices....
  3. Linksys: xbox turns off by itself..won't connect to hdmi

    in XboX Networking Hardware
    Linksys: xbox turns off by itself..won't connect to hdmi: Linksys (Modems/Gateways): xbox turns off by itself..won't connect to hdmi Hello feliciahill1, Thank you for posting on the Xbox forums. We recommend utilizing the article entitled, "Troubleshoot...
  4. Linksys Linksys WRT320N: Xbox live connection

    in XboX Networking Hardware
    Linksys Linksys WRT320N: Xbox live connection: Linksys (Routers) Linksys WRT320N: Xbox live connection Looks like a problem with the system update. Here is a link to help try the update from the start. Status Code 8007-2AF9 | Error Code...
  5. Linksys Linksys BEFCMU10 v3: Can’t connect Xbox live

    in XboX Networking Hardware
    Linksys Linksys BEFCMU10 v3: Can’t connect Xbox live: Linksys (Modems/Gateways) Linksys BEFCMU10 v3 (Modem): Can’t connect Xbox live Please check link Restore to Factory Defaults | Xbox One 76d4c962-762c-48b2-94ba-1077e85c1eb7
  6. Linksys Linksys WGA54G: Suppression de gold prélèvements

    in XboX Networking Hardware
    Linksys Linksys WGA54G: Suppression de gold prélèvements: Linksys (Powerline Adapters) Linksys WGA54G: Suppression de gold prélèvements Désolé de l'entendre. Si votre fils a un abonnement récurrent, vous devez vous connecter son compte ou au compte...
  7. Linksys Linksys EA6500: Problems with Linksys EA8300

    in XboX Networking Hardware
    Linksys Linksys EA6500: Problems with Linksys EA8300: Linksys (Routers) Linksys EA6500: Problems with Linksys EA8300 I have a brand spanking new Linksys EA8300 router. Was working fine with both of my Xbox's and all other home devices until today...
  8. Linksys: UPnP

    in XboX Networking Hardware
    Linksys: UPnP: Linksys (Routers): UPnP Login Information Gateway: 192.168.0.1 Username: user Password: (provided by the ISP) (or left blank) UPnP This feature is unavailable on this device...
  9. Linksys: UPnP

    in XboX Networking Hardware
    Linksys: UPnP: Linksys (Routers): UPnP It should be possible to disable the UPnP. If not, I would advise you to dubble check with linksys support; www.linksys.com/.../support b87bfe32-07e4-41af-80cf-2a0b6487ac9d
  10. Linksys EA6400 only shows one xbox in device list

    in XBoX on Consoles
    Linksys EA6400 only shows one xbox in device list: I have a linksys EA 6400 router with 2 xbox consoles connected to it via cat 5e cable. Both wires go through separate switches between the router and the xbox consoles. When both consoles are...