Netgear: Entering PPPoE

Discus and support Netgear: Entering PPPoE in XboX Networking Hardware to solve the problem; Netgear (Routers): Entering PPPoE Netgear JNR3210 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Apr 27, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear: Entering PPPoE


    Netgear (Routers): Entering PPPoE
    Netgear JNR3210

    Login Information

    Netgear Smart Wizard - Light Blue

    Entering PPPoE

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Basic Settings.
    5. Where it says Does your internet connection require a login select yes.
    6. Enter the user name and password for your PPPoE in their respective fields.
    7. Select apply.


    Netgear Genie - Black/Purple

    Entering PPPoE

    1. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    3. Select the Basic tab from the tabs at the top.
    4. Select Internet from the menu on the left
    5. Where it asks if your internet connection requires a login select yes.
    6. Input in your PPPOE user name and password.
    7. Select Apply.

    :)
     
    XB1R Hades, Apr 27, 2014
    #1
  2. XB1R Hades
    XB1R Hades Guest
    Netgear: Entering PPPoE

    Netgear (Routers): Entering PPPoE
    Login Information


    Entering PPPoE

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Basic Settings.
    5. Where it says Does your internet connection require a login select yes.
    6. Enter the user name and password for your pppoe in their respective fields.
    7. Select apply.
     
    XB1R Hades, Apr 27, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Netgear: Entering PPPoE

    Netgear (Routers): Entering PPPoE
    Login Information

    • Gateway - 192.168.1.1, 10.0.0.1, or routerlogin.net
    • Username - admin
    • Password – password

    Netgear - Smart Wizard- Light Blue

    Entering PPPoE

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Basic Settings.
    5. Where it says Does your internet connection require a login select yes.
    6. Enter the user name and password for your pppoe in their respective fields.
    7. Select apply.


    Netgear - Genie - Black/Purple

    Entering PPPoE

    1. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    2. The router will then prompt you to enter the username and password.

      the default user name and password are: "admin", "password".
    3. Select the Basic tab from the tabs at the top.
    4. Select Internet from the the menu on the left
    5. Where it asks if your internet connection requires a login select yes.
    6. Input in your PPPOE user name and password.
    7. Select Apply.
     
    XB1R Athena, Apr 27, 2014
    #3
  4. GMAN990 Win User

    netgear wgr614v10 NAT strict

    Ok the issue is with the modem then, leave your router setup as it is now. You will need to "bridge" the modem (how you do that depends on the model of modem") and then enter your PPPoE details into your Netgear if your ISP uses PPPoE to connect

    www.unofficialguidetolive.co.uk/.../171-how-to-configure-a-netgear-router-to-use-pppoe

    You need to be prepared to do this change because if you don't have all of the info you need like the PPPoE username/password (if your ISP uses it) you can end up cutting yourself and have to reset the modem again.

    Its not hard to do I just wanted to make you aware that's all, and its the only way you will fix this.
  5. GMAN990 Win User

    Strict NAT with correct ports

  6. GMAN990 Win User

    Connecting multplie Xbox's to live over same connection

    As long as your modem supports ADSL2+ and you can bridge it that's all you need to be honest, all it needs to do is shift data from the Internet to your router and vice-versa all of the hard work is done by the router

    The DGTeam firmware sounds like a good option, so you could bridge it and then setup your router to use PPPoE hopefully

    www.unofficialguidetolive.co.uk/.../203-how-to-configure-a-netgear-router-to-use-pppoe
    that is where you would enter the Sky username/password
  7. GMAN990 Win User

    ICMP Error

    Hi

    The Zyxel is a modem/router have you bridged the modem because if not you will suffer issues as you have two devices that are both NAT'ing otherwise , the Zyxel and the Netgear

    If you are not sure about bridging please contact your ISP as you may need additional details (PPPoE username/password) to enter into your Netgear before the change will work
  8. Rusty Pennyy Win User

    I have an Open NAT on my x360 but strict on XOne, please help.

    How do I configure my Netgear to perform the DSL login via PPPoE? I'm not sure how to do this.
Thema:

Netgear: Entering PPPoE

Loading...
  1. Netgear: Entering PPPoE - Similar Threads - Netgear Entering PPPoE

  2. Netgear Netgear DGN3500: Entering PPPoE

    in XboX Networking Hardware
    Netgear Netgear DGN3500: Entering PPPoE: Netgear (Modems/Gateways) Netgear DGN3500: Entering PPPoE Login Information Gateway - 192.168.0.1 Username - admin Password - password Entering PPPoE Plug the computer into a LAN port via...
  3. Netgear Netgear DGN2200: Entering PPPoE

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Entering PPPoE: Netgear (Modems/Gateways) Netgear DGN2200: Entering PPPoE Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard Entering PPPoE...
  4. Netgear Netgear DGN1000/DGN1000SP: Entering PPPoE

    in XboX Networking Hardware
    Netgear Netgear DGN1000/DGN1000SP: Entering PPPoE: Netgear (Modems/Gateways) Netgear DGN1000/DGN1000SP: Entering PPPoE Netgear DGN1000 Login Information Gateway - 192.168.0.1 Username - admin Password - password Entering PPPoE Plug the...
  5. Netgear: Entering PPPoE

    in XboX Networking Hardware
    Netgear: Entering PPPoE: Netgear (Routers): Entering PPPoE Entering PPPoE Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address. The router will then...
  6. Netgear: Entering PPPoE

    in XboX Networking Hardware
    Netgear: Entering PPPoE: Netgear (Routers): Entering PPPoE Netgear WNR834M Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart Wizard -...
  7. Netgear: Entering PPPoE

    in XboX Networking Hardware
    Netgear: Entering PPPoE: Netgear (Routers): Entering PPPoE Netgear WNR834B Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Entering PPPoE Plug the...
  8. Netgear: Entering PPPoE

    in XboX Networking Hardware
    Netgear: Entering PPPoE: Netgear (Routers): Entering PPPoE Netgear WNDR4000 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart Wizard -...
  9. Netgear: Entering PPPoE

    in XboX Networking Hardware
    Netgear: Entering PPPoE: Netgear (Routers): Entering PPPoE Netgear MR814 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Entering PPPoE Plug the...
  10. Netgear: Entering PPPoE

    in XboX Networking Hardware
    Netgear: Entering PPPoE: Netgear (Routers): Entering PPPoE Netgear KWGR614 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart Wizard *...