Netgear: Firmware Update

Discus and support Netgear: Firmware Update in XboX Networking Hardware to solve the problem; Netgear (Routers): Firmware Update Netgear JWNR2000 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin... Discussion in 'XboX Networking Hardware' started by XB1R Hades, May 1, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear: Firmware Update


    Netgear (Routers): Firmware Update
    Netgear JWNR2000

    Login Information

    Netgear Smart Wizard - Light Blue

    Firmware Update

    Auto Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    5. The Netgear smart wizard will automatically search for updates upon login, if an update is available click install.
    Manual Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    5. Select Advanced from the tabs at the top.
    6. Select Administraion from the menu on the left.
    7. Select Router Update from the submenu.
    8. In an alternate web browser or tab go to www.NETGEAR.com and download the updated software. If not done automatically, un-compress the file.
    9. Click Browse.
    10. Locate and select the file you just downloaded and uncompressed.
    11. Click Upload to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes
      restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.
    12. Click Router Status and check the Firmware Version to verify that your router now has the new software installed


    Netgear Genie - Black/Purple

    Firmware Update

    Auto Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    5. The Netgear smart wizard will automatically search for updates upon login, if an update is available click install.
    Manual Update

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Open web browser.
    3. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the username and password. The default user name and password are: "admin", "password".
    5. Select Advanced from the tabs at the top.
    6. Select administration from the menu on the left.
    7. Select Router Update from the submenu.
    8. In an alternate web browser or tab go to www.NETGEAR.com and download the updated software. If not done automatically, un-compress the file.
    9. Click Browse.
    10. Locate and select the file you just downloaded and uncompressed.
    11. Click Upload to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes
      restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.
    12. Click Router Status and check the Firmware Version to verify that your router now has the new software installed.


    :)
     
    XB1R Hades, May 1, 2014
    #1
  2. XB1R Apollo
    XB1R Apollo Guest
    Netgear: Firmware Update

    Netgear (Routers): Firmware Update
    Login Information


    How to Find Firmware Version

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Router Status.
    5. The firmware version will be listed as Firmware Version.


    Firmware Update

    Auto Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open web browser.
    3. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    5. The netgear smart wizard will automatically search for updates upon login, if an update is available click install.
    Manual Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open web browser.
    3. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    5. Select Advanced from the tabs at the top.
    6. Select Administraion from the menu on the left.
    7. Select Router Update from the submenu.
    8. In an alternate web browser or tab go to www.NETGEAR.com and download the updated software. If not done automatically, uncompress the file.
    9. Click Browse.
    10. Locate and select the file you just downloaded and uncompressed.
    11. Click Upload to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes
      restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.
    12. Click Router Status and check the Firmware Version to verify that your router now has the new software installed
     
    XB1R Apollo, May 1, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Netgear: Firmware Update

    Netgear (Routers): Firmware Update
    Login Information

    How to Find Firmware Version

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Router Status.
    5. The firmware version will be listed as Firmware Version.


    Firmware Update

    Auto Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open web browser.
    3. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    5. The netgear smart wizard will automatically search for updates upon login, if an update is available click install.
    Manual Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open web browser.
    3. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    4. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    5. Select Advanced from the tabs at the top.
    6. Select Administraion from the menu on the left.
    7. Select Router Update from the submenu.
    8. In an alternate web browser or tab go to www.NETGEAR.com and download the updated software. If not done automatically, uncompress the file.
    9. Click Browse.
    10. Locate and select the file you just downloaded and uncompressed.
    11. Click Upload to send the software to the router. This loads the new software in the router and causes the router to restart. Note: Do not try to go online, turn off the router, shutdown the computer or do anything else to the router until the router finishes
      restarting! When the Ready light stops blinking, wait a few more seconds before doing anything.
    12. Click Router Status and check the Firmware Version to verify that your router now has the new software installed
    .
     
    XB1R Apollo, May 1, 2014
    #3
  4. Trent Marando Win User

    I can not connect to xbox live yet when i test my connection it's fine,

    I had this issue with a old POE netgear switch, i swapped it for an HP and all is fine. Then updated the firmware on the Netgear and it was fine
  5. oI Dunkan Io Win User

    Xbox disconnects my Internet

    The Modem is a Netgear Dm111P and the Router is a Netgear WGR614 v9, I have updated the firmware and that did nothing. It's unreal how irritating it has become.
  6. O8NJ Win User

    Connected to live, but play any games online....Help Me !!!!!!!!!!!!!!!!!

    i use a NETGEAR N6000 and i just updated my firmware last night and it still doesnt work
  7. taidara Win User

    Replaced old model xbox with brand new one - won't connect to the wifi

    Could you visit Netgear website and make sure your router is up-to-date with the latest version of firmware. If a software update is available for this device, remember to restore the router after you've updated the firmware.

    Which security method and encryption are you using (WEP, WPA, WPA2-PSK with AES enryption)?

    Please read:
    Netgear WNDR3400, known issues
    .
  8. mbuxx Win User

    Strict NAT router DLINK DIR-850L

    someone over at netgear had suggested disabling SIP. Ill give that a try when i get home and hopefully some luck.

    I did factory reset the netgear after the firmware update.
Thema:

Netgear: Firmware Update

Loading...
  1. Netgear: Firmware Update - Similar Threads - Netgear Firmware Update

  2. Netgear: DO NOT UPGRADE FIRMWARE TO LATEST

    in XboX Networking Hardware
    Netgear: DO NOT UPGRADE FIRMWARE TO LATEST: Netgear (Routers): DO NOT UPGRADE FIRMWARE TO LATEST Having similar problems with my r7000. Do you have IPv6 enabled on your router? Just asking because I'm trying that now....
  3. Netgear Netgear DGN3500: Firmware Update

    in XboX Networking Hardware
    Netgear Netgear DGN3500: Firmware Update: Netgear (Modems/Gateways) Netgear DGN3500: Firmware Update Login Information Gateway - 192.168.0.1 Username - admin Password - password Firmware Update Auto Update Plug the computer into...
  4. Netgear Netgear DGN2200: Firmware Update

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Firmware Update: Netgear (Modems/Gateways) Netgear DGN2200: Firmware Update Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard Firmware Update...
  5. Netgear Netgear DGN1000/DGN1000SP: Firmware Update

    in XboX Networking Hardware
    Netgear Netgear DGN1000/DGN1000SP: Firmware Update: Netgear (Modems/Gateways) Netgear DGN1000/DGN1000SP: Firmware Update Netgear DGN1000 Login Information Gateway - 192.168.0.1 Username - admin Password - password Firmware Update Auto...
  6. Netgear: Firmware Update

    in XboX Networking Hardware
    Netgear: Firmware Update: Netgear (Routers): Firmware Update Netgear WNR834M Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart Wizard -...
  7. Netgear: Firmware Update

    in XboX Networking Hardware
    Netgear: Firmware Update: Netgear (Routers): Firmware Update Netgear WNR834B Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Firmware Update Auto...
  8. Netgear: Firmware Update

    in XboX Networking Hardware
    Netgear: Firmware Update: Netgear (Routers): Firmware Update Netgear WNDR4000 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart Wizard -...
  9. Netgear: Firmware Update

    in XboX Networking Hardware
    Netgear: Firmware Update: Netgear (Routers): Firmware Update Netgear MR814 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Firmware Update Auto...
  10. Netgear: Firmware Update

    in XboX Networking Hardware
    Netgear: Firmware Update: Netgear (Routers): Firmware Update Netgear KWGR614 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart Wizard *...