Netgear Netgear CG3100D: Restore Factory Defaults

Discus and support Netgear Netgear CG3100D: Restore Factory Defaults in XboX Networking Hardware to solve the problem; Netgear (Modems/Gateways) Netgear CG3100D: Restore Factory Defaults Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username –... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, May 19, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Netgear Netgear CG3100D: Restore Factory Defaults


    Netgear (Modems/Gateways) Netgear CG3100D: Restore Factory Defaults
    Netgear CG3100D

    Login Information:

    • Default Gateway - 192.168.0.1
    • Username – admin
    • Password – password



    Restore Factory Defaults

    Through firmware

    *Not Available*

    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the bottom of the gateway.
    3. Press and hold the reset button for 7 seconds.


    :)
     
    XBR Poseidon, May 19, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Netgear: Restore Factory Defaults

    Netgear (Routers): Restore Factory Defaults
    Login Information

    • Gateway - 192.168.1.1, 10.0.0.1, or routerlogin.net
    • Username – admin
    • Password – password

    Netgear - Smart Wizard- Light Blue



    Restoring Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
    Netgear - Genie - Black/Purple



    Restoring Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the username and password.

      the default user name and password are: "admin", "password".
    4. Select the Advanced tab from the tabs at the top.
    5. Select Administration from menu on the left.
    6. From the submenu select Backup Settings.
    7. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XB1R Athena, May 19, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Netgear: Restore Factory Defaults

    Netgear (Routers): Restore Factory Defaults
    Login Information

    • Gateway - 192.168.0.1 (v1-v5) or 192.168.1.1 (v6-v10)
    • Username - admin
    • Password - password

    Restore Factory Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XB1R Apollo, May 19, 2014
    #3
  4. Wo0dsiE Win User

    Netgear: Restoring Defaults

    The only thing that worked for me when I started having connect to xboxlive problems is restoring factory defaults on my router. I did it the easy way, I reset used the reset button in the back. (press it with a paper clip until the power button starts blinking...
    only took mine less than five seconds) the router does the rest. Make sure you set the wireless security back to WPA2 (strongest). Then create your password. I'm back playing ghosts again with no issues. Not sure how it got out of whack and I was ready to
    go buy a new one, but all is good now.
  5. taidara Win User

    New xbox slim - no wireless networks found

    Greetings Bunny Assassins!

    Have you tried to restore (reset) the Netgear power adapters back to factory defaults and then pair them up again?
  6. MITRO008 Win User

    Netgear Netgear CG3100D: MAC Filtering

    Im Having trouble connecting my xbox one to my nether modem. could it be a MAC address filtering issue? if so how can i check or fix this issue
  7. ButcherVan Win User

    Netgear Netgear CG3100D: Multiple Console Support

    That is actually false. I have 4 consoles on the Gateway with an open Nat to each one. None are to the DMZ and none are port forwarded.
  8. GMAN990 Win User

    Can't connect anymore!

Thema:

Netgear Netgear CG3100D: Restore Factory Defaults

Loading...
  1. Netgear Netgear CG3100D: Restore Factory Defaults - Similar Threads - Netgear Netgear CG3100D

  2. Netgear Netgear CG3100D: Device Manual

    in XboX Networking Hardware
    Netgear Netgear CG3100D: Device Manual: Netgear (Modems/Gateways) Netgear CG3100D: Device Manual Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Device Manual Support...
  3. Netgear Netgear CG3100D: Multiple Console Support

    in XboX Networking Hardware
    Netgear Netgear CG3100D: Multiple Console Support: Netgear (Modems/Gateways) Netgear CG3100D: Multiple Console Support That is actually false. I have 4 consoles on the Gateway with an open Nat to each one. None are to the DMZ and none are port...
  4. Netgear Netgear CG3100D: Known Issues

    in XboX Networking Hardware
    Netgear Netgear CG3100D: Known Issues: Netgear (Modems/Gateways) Netgear CG3100D: Known Issues Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Known Issues *None at this...
  5. Netgear Netgear CG3100D: Firmware

    in XboX Networking Hardware
    Netgear Netgear CG3100D: Firmware: Netgear (Modems/Gateways) Netgear CG3100D: Firmware Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password How to Find Firmware Version...
  6. Netgear Netgear CG3100D: Firewall

    in XboX Networking Hardware
    Netgear Netgear CG3100D: Firewall: Netgear (Modems/Gateways) Netgear CG3100D: Firewall Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Firewall Login to the router by...
  7. Netgear Netgear CG3100D: Port Forwarding

    in XboX Networking Hardware
    Netgear Netgear CG3100D: Port Forwarding: Netgear (Modems/Gateways) Netgear CG3100D: Port Forwarding Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Port Forwarding Login to...
  8. Netgear Netgear CG3100D: DMZ

    in XboX Networking Hardware
    Netgear Netgear CG3100D: DMZ: Netgear (Modems/Gateways) Netgear CG3100D: DMZ Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password DMZ Login to the router by entering...
  9. Netgear Netgear CG3100D: UPnP

    in XboX Networking Hardware
    Netgear Netgear CG3100D: UPnP: Netgear (Modems/Gateways) Netgear CG3100D: UPnP Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password UPnP Login to the router by entering...
  10. Netgear Netgear CG3100D: DHCP Reservation

    in XboX Networking Hardware
    Netgear Netgear CG3100D: DHCP Reservation: Netgear (Modems/Gateways) Netgear CG3100D: DHCP Reservation Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password DHCP Reservation Login...