Netgear Netgear DGN2200: Restore Factory Defaults

Discus and support Netgear Netgear DGN2200: Restore Factory Defaults in XboX Networking Hardware to solve the problem; Netgear (Modems/Gateways) Netgear DGN2200: Restore Factory Defaults Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Jul 16, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear Netgear DGN2200: Restore Factory Defaults


    Netgear (Modems/Gateways) Netgear DGN2200: Restore Factory Defaults
    Netgear DGN2200

    Login Information

    • Gateway - 192.168.0.1
    • Username - admin
    • Password - password
    Netgear SmartWizard

    Restore Factory Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. the default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.


    Netgear Genie

    Restore Factory Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the username and password.

      The default user name and password are: "admin", "password".
    4. Select the Advanced tab from the tabs at the top.
    5. Select Administration from menu on the left.
    6. From the submenu select Backup Settings.
    7. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.


    :)
     
    XB1R Hades, Jul 16, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Netgear: Restore Factory Defaults

    Netgear (Routers): Restore Factory Defaults
    Login Information

    • Gateway - 192.168.1.1, 10.0.0.1, or routerlogin.net
    • Username – admin
    • Password – password

    Netgear - Smart Wizard- Light Blue



    Restoring Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
    Netgear - Genie - Black/Purple



    Restoring Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the username and password.

      the default user name and password are: "admin", "password".
    4. Select the Advanced tab from the tabs at the top.
    5. Select Administration from menu on the left.
    6. From the submenu select Backup Settings.
    7. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XB1R Athena, Jul 16, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Netgear: Restore Factory Defaults

    Netgear (Routers): Restore Factory Defaults
    Login Information

    • Gateway - 192.168.0.1 (v1-v5) or 192.168.1.1 (v6-v10)
    • Username - admin
    • Password - password

    Restore Factory Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XB1R Apollo, Jul 16, 2014
    #3
  4. Wo0dsiE Win User

    Netgear: Restoring Defaults

    The only thing that worked for me when I started having connect to xboxlive problems is restoring factory defaults on my router. I did it the easy way, I reset used the reset button in the back. (press it with a paper clip until the power button starts blinking...
    only took mine less than five seconds) the router does the rest. Make sure you set the wireless security back to WPA2 (strongest). Then create your password. I'm back playing ghosts again with no issues. Not sure how it got out of whack and I was ready to
    go buy a new one, but all is good now.
  5. taidara Win User

    New xbox slim - no wireless networks found

    Greetings Bunny Assassins!

    Have you tried to restore (reset) the Netgear power adapters back to factory defaults and then pair them up again?
  6. MORPHOLE Win User

    Netgear Netgear DGN2200: UPnP

    Having a number of multiple xbox one NAT issues (particularly with Destiny) with this gateway.
  7. GMAN990 Win User

    Can't connect anymore!

  8. BiggsHD Win User

    My friend can't hear me on xbox live anymore.

    @zanswerlive @taidara - I've just come back from his house, we've both restored our routers to factory settings. My mate has a Netgear CG3100 and I've got a Netgear C6300

    I've also got 2 xbox 360 consoles that connect to the same router but has never been a problem
Thema:

Netgear Netgear DGN2200: Restore Factory Defaults

Loading...
  1. Netgear Netgear DGN2200: Restore Factory Defaults - Similar Threads - Netgear Netgear DGN2200

  2. Netgear Netgear DGN2200: Xbox one can not connect to wifi network

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Xbox one can not connect to wifi network: Netgear (Modems/Gateways) Netgear DGN2200: Xbox one can not connect to wifi network This may help with your issue. Xbox One Network Connection Help | Troubleshoot Xbox Live Connection...
  3. Netgear Netgear DGN2200: My internet speed is slow. Is there a DNS around Greensburg Indiana ...

    in XboX Networking Hardware
    Netgear Netgear DGN2200: My internet speed is slow. Is there a DNS around Greensburg Indiana ...: Netgear (Modems/Gateways) Netgear DGN2200: My internet speed is slow. Is there a DNS around Greensburg Indiana that could help my internet? I live in Greensburg Indiana, my internet connection is...
  4. Netgear Netgear DGN2200: Known Issues

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Known Issues: Netgear (Modems/Gateways) Netgear DGN2200: Known Issues Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Known Issues There are no known...
  5. Netgear Netgear DGN2200: Entering PPPoE

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Entering PPPoE: Netgear (Modems/Gateways) Netgear DGN2200: Entering PPPoE Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard Entering PPPoE...
  6. Netgear Netgear DGN2200: Firmware Update

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Firmware Update: Netgear (Modems/Gateways) Netgear DGN2200: Firmware Update Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard Firmware Update...
  7. Netgear Netgear DGN2200: How to Find Firmware Version

    in XboX Networking Hardware
    Netgear Netgear DGN2200: How to Find Firmware Version: Netgear (Modems/Gateways) Netgear DGN2200: How to Find Firmware Version Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard How...
  8. Netgear Netgear DGN2200: Firewall

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Firewall: Netgear (Modems/Gateways) Netgear DGN2200: Firewall Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard Firewall Login to...
  9. Netgear Netgear DGN2200: DMZ

    in XboX Networking Hardware
    Netgear Netgear DGN2200: DMZ: Netgear (Modems/Gateways) Netgear DGN2200: DMZ Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard DMZ Login to router by...
  10. Netgear Netgear DGN2200: UPnP

    in XboX Networking Hardware
    Netgear Netgear DGN2200: UPnP: Netgear (Modems/Gateways) Netgear DGN2200: UPnP Having a number of multiple xbox one NAT issues (particularly with Destiny) with this gateway. 4ecf7e1d-6691-4794-a6e0-728c30f94a3f