Netgear Netgear DGND3700: Overview

Discus and support Netgear Netgear DGND3700: Overview in XboX Networking Hardware to solve the problem; Netgear (Modems/Gateways) Netgear DGND3700: Overview Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password –... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, May 18, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Netgear Netgear DGND3700: Overview


    Netgear (Modems/Gateways) Netgear DGND3700: Overview
    Netgear DGND3700

    Login Information:

    • Default Gateway - 192.168.0.1
    • Username – admin
    • Password – password



    How to Find SSID (Network Name)



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Wireless Settings from the menu on the left.
    4. The network name for your 2.4Ghz network can be found in the top section (2.4Ghz b/g/n) next to Name (SSID).
    5. The network name for your 5Ghz network can be found in the bottom section (5Ghz a/n) next to Name (SSID).


    How To Find Wireless Passphrase (WPA/WEP)



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Wireless Settings from the menu on the left.
    4. The Wireless Passphrase for your 2.4Ghz network can be found in the lower half of the top section (2.4Ghz b/g/n) next to Passphrase.
    5. The Wireless Passphrase for your 5Ghz network can be found in the lower half of the bottom section (5Ghz a/n) next to Passphrase.


    Changing Wireless Security Type/ Disabling Wireless Security



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Wireless Settings from the menu on the left.
    4. From the Security Options section Select the desired security type, None if needed.
    5. Click the Apply button if any changes were made.


    MAC Filtering



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Wireless Settings under the Advanced section of the menu on the left.
    4. Click the Setup Access List button.
    5. Uncheck the Turn Access Control On box.
    6. Click the Apply button at the bottom of the page.


    Change Wireless Channel



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Wireless from the menu on the left.
    4. From the drop down menu labeled Channel select the desired channel. (Channels 1,3,9,11)
    5. Click Apply.


    Change Wireless Mode



    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to the router by entering 192.168.0.1 in to the address bar.
    3. Enter the username “admin” and the password “password”.
    4. Select Wireless from the menu on the left.
    5. From the Mode drop down select up to “Up to 54 Mbps”.
    6. Click the apply button at the bottom of the screen.


    Change Wireless Band (Width)



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Wireless from the menu on the left.
    4. From the Mode drop down select “Up to 145Mbps”
    5. Click Apply.


    DHCP Reservation



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Lan Setup from the menu under the Advanced section on the left side.
    4. Click the Add button under the Address Reservation section.
    5. Enter the Desired IP, the MAC Address of you console and a name for the device in the provided fields.
    6. Click the Add button to save your DHCP Reservation.


    UPnP



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select UPnP from under the Advanced section on the left side.
    4. Toggle UPnP on or off by checking or unchecking the Turn UPnP On box.
    5. Click the Apply button at the bottom of the screen.


    DMZ



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select WAN Setup from under the Advanced section on the left side.
    4. Check the Default DMZ Server box and enter the IP Address of your Xbox console.
    5. Click the Apply button at the bottom of the page.


    Disable DMZ



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select WAN Setup from under the Advanced section on the left side.
    4. Uncheck the Default DMZ Server box.
    5. Click the Apply button at the bottom of the page.


    Port Forwarding



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Port Forwarding/Port Triggering under the Content Filtering section.
    4. Click the Add Customer Service button.
    5. Type a Service Name that has something to do with Xbox.
    6. Set the Service Type to TCP/UDP.
    7. Set both the Starting Port and Ending Port to 3074.
    8. Enter the IP Address of your Xbox console in the Server IP Address space.
    9. Click the Apply button at the bottom of the page.


    Disable Port Forwarding



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Port Forwarding/Port Triggering under the Content Filtering section.
    4. Select the rule that refers to either the IP Address of the Xbox Console and/or contains the Port 3074.
    5. Click the Delete Service button at the bottom of the screen.


    Firewall



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select WAN Setup from under the Advanced section on the left side.
    4. Set NAT Filtering to Open.
    5. Check the Disable SIP ALG box.
    6. Click the Apply button at the bottom of the screen.


    How to Find Firmware Version



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Router Status from under the Maintenance section.
    4. Make a note of the Firmware Version.


    Firmware Update



    Auto Update

    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Router Upgrade from under the Maintenance section.
    4. Click the Check button.
    5. If a new version is available a message stating the old and new versions will be displayed.
    6. Click the Yes button to start the upgrade.


    Manual Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Go to Support | NETGEAR
    3. Locate the support page for the DGND3700 and download and save the latest version of firmware.
    4. Login to the router by entering 192.168.0.1 in to the address bar.
    5. Enter the username “admin” and the password “password”.
    6. Select Router Upgrade from under the Maintenance section.
    7. Click the Browse button and locate the file that was downloaded from Netgear’s support site.
    8. Once the file is selected click the Upload button.


    Restore Factory Defaults



    Through firmware



    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to the router by entering 192.168.0.1 in to the address bar.
    3. Enter the username “admin” and the password “password”.
    4. Select Backup Settings from under the Maintenance section.
    5. Click the Erase button at the bottom of the screen.
    6. Confirm the action if needed.


    Through Hardware



    1. Plug the computer into a LAN port via an ethernet cable.
    2. Press and hold both the Wireless On/Off and WPS buttons for six seconds.


    Known Issues

    This device has been known to have connectivity issues in Titanfall and Forza.

    Known fixes at this time are to update the firmware and if that does not work then to use manual DNS settings in the Xbox.



    Multiple Console Support

    We have no confirmed cases where multiple consoles were able to obtain an Open NAT state while using this device. Please comment on this page if you have been able obtain Open NAT on two or more consoles using this device.

    Device Manual

    Support Page.

    :)
     
    XBR Poseidon, May 18, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Netgear Netgear DGND3700: Device Manual

    Netgear (Modems/Gateways) Netgear DGND3700: Device Manual
    Netgear DGND3700

    Login Information:

    • Default Gateway - 192.168.0.1
    • Username – admin
    • Password – password



    Device Manual

    Support Page.
     
    XBR Poseidon, May 18, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Netgear Netgear DGND3700: Firmware

    Netgear (Modems/Gateways) Netgear DGND3700: Firmware
    Netgear DGND3700

    Login Information:

    • Default Gateway - 192.168.0.1
    • Username – admin
    • Password – password



    How to Find Firmware Version



    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Router Status from under the Maintenance section.
    4. Make a note of the Firmware Version.


    Firmware Update



    Auto Update

    1. Login to the router by entering 192.168.0.1 in to the address bar.
    2. Enter the username “admin” and the password “password”.
    3. Select Router Upgrade from under the Maintenance section.
    4. Click the Check button.
    5. If a new version is available a message stating the old and new versions will be displayed.
    6. Click the Yes button to start the upgrade.


    Manual Update

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Go to Support | NETGEAR
    3. Locate the support page for the DGND3700 and download and save the latest version of firmware.
    4. Login to the router by entering 192.168.0.1 in to the address bar.
    5. Enter the username “admin” and the password “password”.
    6. Select Router Upgrade from under the Maintenance section.
    7. Click the Browse button and locate the file that was downloaded from Netgear’s support site.
    8. Once the file is selected click the Upload button.
     
    XBR Poseidon, May 18, 2014
    #3
  4. DannyTx Win User

    Netgear: Overview

    I can't seem to get my nat type to open even after all these steps and the steps xbox provides for "cant find teredo IP" when i run multiplayer test I get that, and when i check more details it says im behind a firewall or not connected. I made sure i disabled
    SIP ALG and changed nat to open, and still doesnt work.
  5. XBF Diego M Win User

    Netgear DGND3700: Netgear C3700-N600 Disconnecting from Xbox 360 Live

    Hey
    SamboActor
    !

    Thank you for letting us know that your issue has been fixed. We'll be locking the thread as the issue has been resolved. If you ever require any help with any other issues please feel free to come back to the Xbox Forums for further assistance. For those
    reading this thread and if the troubleshooting steps didn't help resolve the issue, please feel free to create your own thread asking for assistance. Thank you and have a great day!

    Have a great one!
  6. XBF Leonzo G Win User

    Netgear Netgear R7000: Wifi Netgear

    Hi Blah Blah Blah!

    Thank you very much for bringing this issue to our attention. Are you trying to connect an Xbox One or Xbox 360 to your WiFi? The answers stated above are all great troubleshooting steps to try in order to resolve this issue. We also recommend using this
    article
    Xbox One Network Connection Error Solution
    . These solutions are for the Xbox One. If you need the solutions for the Xbox 360, please let us know. Be sure to let us know the results!
  7. vampireh Win User

    Router

    Hello there.. I have found that the Belkin D600 or the netgear DGND3700 seems to be the best router (modem router that is) I have ever used, drop out has been very minimum or should I say none existent! and the belkin is the easiest to set up out of the
    two. and with them both being dual band, I feel the Netgear is the better of the two, but if money is the issue the belkin is a great choice, they offer 24/7 customer service and phone support, also both units have USB ports so if you want to link a HDD to
    them with out have to pay the price of a network drive
  8. VibroPlex Win User

    Router Issue

Thema:

Netgear Netgear DGND3700: Overview

Loading...
  1. Netgear Netgear DGND3700: Overview - Similar Threads - Netgear Netgear DGND3700

  2. Netgear DGND3700: Netgear C3700-N600 Disconnecting from Xbox 360 Live

    in XboX Networking Hardware
    Netgear DGND3700: Netgear C3700-N600 Disconnecting from Xbox 360 Live: Netgear DGND3700: Netgear C3700-N600 Disconnecting from Xbox 360 Live XBF Leo G, It kicks me off of Xbox 360 Live, NOT the network. I am still connected to the network, but have to reconnect to...
  3. Netgear Netgear DGND3700: Xbox one s won't connect

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Xbox one s won't connect: Netgear (Modems/Gateways) Netgear DGND3700: Xbox one s won't connect I bought an Xbox one s however when I start it up and it gets to the network set up section, I enter my wifi password and it...
  4. Netgear Netgear DGND3700: Device Manual

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Device Manual: Netgear (Modems/Gateways) Netgear DGND3700: Device Manual Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Device Manual Support...
  5. Netgear Netgear DGND3700: Multiple Console Support

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Multiple Console Support: Netgear (Modems/Gateways) Netgear DGND3700: Multiple Console Support Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Multiple...
  6. Netgear Netgear DGND3700: Known Issues

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Known Issues: Netgear (Modems/Gateways) Netgear DGND3700: Known Issues Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Known Issues This...
  7. Netgear Netgear DGND3700: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Restore Factory Defaults: Netgear (Modems/Gateways) Netgear DGND3700: Restore Factory Defaults Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Restore...
  8. Netgear Netgear DGND3700: Firmware

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Firmware: Netgear (Modems/Gateways) Netgear DGND3700: Firmware Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password How to Find Firmware Version...
  9. Netgear Netgear DGND3700: Firewall

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Firewall: Netgear (Modems/Gateways) Netgear DGND3700: Firewall Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Firewall Login to the...
  10. Netgear Netgear DGND3700: Port Forwarding

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Port Forwarding: Netgear (Modems/Gateways) Netgear DGND3700: Port Forwarding Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Port Forwarding...