Netgear Netgear WNDR3400: Can't get OPEN NAT through router

Discus and support Netgear Netgear WNDR3400: Can't get OPEN NAT through router in XboX Networking Hardware to solve the problem; Netgear (Routers) Netgear WNDR3400: Can't get OPEN NAT through router Here is a potential solution for you 1. Login to your router You can do this by... Discussion in 'XboX Networking Hardware' started by MadmaxJH32, Jan 28, 2017.

  1. MadmaxJH32
    MadmaxJH32 Guest

    Netgear Netgear WNDR3400: Can't get OPEN NAT through router


    Netgear (Routers) Netgear WNDR3400: Can't get OPEN NAT through router
    Here is a potential solution for you
    1. Login to your router
    You can do this by navigating to your gateway in your internet browser (I recommend using a PC for this but it can probably be done on the Xbox browser). To find your gateway, go to your network details in Xbox or run ipconfig in your cmd window
    on your PC.

    For example, let's say your gateway is 192.168.0.1. To login to your router, type
    http://192.168.0.1 into your browser. Change this IP address accordingly to match your gateway, just make sure you put http:// in front of it.

    You can login to the WNDR3400 router using "admin" as the username. The password, unless you have changed it, is password. NOTE: Change this password if you haven't already.

    2. Click the Advanced tab -> Advanced Setup -> IPv6
    This opens your IPv6 settings. These are set to disabled by default. To change this setting, click the drop-down on the right side of the screen and change it to Auto Detect.

    Click Apply Settings

    3. After waiting a full minute, click Status Refresh
    Allow the status to refresh, and then check to see if it updates. If it still says detecting... then wait a few minutes and try again.

    4. Check your NAT type on your Xbox
    Navigate back to your Xbox Network Settings and test your NAT. It should now say that it is open.

    :)
     
    MadmaxJH32, Jan 28, 2017
    #1
  2. zLemonProz
    zLemonProz Guest
    Netgear Netgear WNDR3400: Need help with my NAT type

    Netgear (Routers) Netgear WNDR3400: Need help with my NAT type
    I have been trying everything to get my NAT type open but nothing works because no one has the same NAT type as mine:

    NAT type: Strict

    Your network is behind a port-symmetric NAT

    its very frustrating having a strict NAT type so please help
     
    zLemonProz, Jan 28, 2017
    #2
  3. leonard1111
    leonard1111 Guest
    Mw3 Connection Issues

    Router is N600 Dual Band NETGEAR WNDR3400
     
    leonard1111, Jan 28, 2017
    #3
  4. bendres97
    bendres97 Guest

    Netgear Netgear WNDR3400: Can't get OPEN NAT through router

    Here is a potential solution for you
    1. Login to your router
    You can do this by navigating to your gateway in your internet browser (I recommend using a PC for this but it can probably be done on the Xbox browser). To find your gateway, go to your network details in Xbox or run ipconfig in your cmd window
    on your PC.

    For example, let's say your gateway is 192.168.0.1. To login to your router, type
    http://192.168.0.1 into your browser. Change this IP address accordingly to match your gateway, just make sure you put http:// in front of it.

    You can login to the WNDR3400 router using "admin" as the username. The password, unless you have changed it, is password. NOTE: Change this password if you haven't already.

    2. Click the Advanced tab -> Advanced Setup -> IPv6
    This opens your IPv6 settings. These are set to disabled by default. To change this setting, click the drop-down on the right side of the screen and change it to Auto Detect.

    Click Apply Settings

    3. After waiting a full minute, click Status Refresh
    Allow the status to refresh, and then check to see if it updates. If it still says detecting... then wait a few minutes and try again.

    4. Check your NAT type on your Xbox
    Navigate back to your Xbox Network Settings and test your NAT. It should now say that it is open.
     
    bendres97, Jul 4, 2018
    #4
Thema:

Netgear Netgear WNDR3400: Can't get OPEN NAT through router

Loading...
  1. Netgear Netgear WNDR3400: Can't get OPEN NAT through router - Similar Threads - Netgear Netgear WNDR3400

  2. Netgear DGN3500: Netgear LB2120 UPnP Unavailable

    in XboX Networking Hardware
    Netgear DGN3500: Netgear LB2120 UPnP Unavailable: Netgear DGN3500: Netgear LB2120 UPnP Unavailable I'm a bit confused about what you mean by "this device is linked to an actual router". From the specifications, the LB2120 takes a wired WAN...
  3. Netgear DGND3700: Netgear C3700-N600 Disconnecting from Xbox 360 Live

    in XboX Networking Hardware
    Netgear DGND3700: Netgear C3700-N600 Disconnecting from Xbox 360 Live: Netgear DGND3700: Netgear C3700-N600 Disconnecting from Xbox 360 Live XBF Leo G, It kicks me off of Xbox 360 Live, NOT the network. I am still connected to the network, but have to reconnect to...
  4. : My XBox can't connect to Netgear Orbi WIFI

    in XboX Networking Hardware
    : My XBox can't connect to Netgear Orbi WIFI: : My XBox can't connect to Netgear Orbi WIFI Hi Sluzze, Thanks for keeping us updated with your replies. Sorry to hear you're still experiencing the same issue. Since you received the error...
  5. Netgear D7000v2 24/7 Strict Nat

    in XBoX Games and Apps
    Netgear D7000v2 24/7 Strict Nat: I have never had an open nat. I've tried numerous thungs .UPNP, Port Forwarding, Static IP, Port Triggering, Updating router and the list extends 99% of the time it says UPNP failed .Other times...
  6. Netgear 6200: Upload speed suddenly slowed

    in XboX Networking Hardware
    Netgear 6200: Upload speed suddenly slowed: Netgear 6200: Upload speed suddenly slowed This is sounding like a limit sent via the ISP if none of these testers are working Please check your ports on your router/modem and try getting in touch...
  7. Netgear: Can't connect to wireless router or open network settings on Xbox to connect.

    in XboX Networking Hardware
    Netgear: Can't connect to wireless router or open network settings on Xbox to connect.: Netgear (Modems/Gateways): Can't connect to wireless router or open network settings on Xbox to connect. Also take a look at this one if the first link does not help: Xbox Live Wireless Network...
  8. Netgear Netgear WNDR3400: Why is my internet speed topping out at roughly 72Mpbs on both wired ...

    in XboX Networking Hardware
    Netgear Netgear WNDR3400: Why is my internet speed topping out at roughly 72Mpbs on both wired ...: Netgear (Routers) Netgear WNDR3400: Why is my internet speed topping out at roughly 72Mpbs on both wired and wireless devices? Have you tried switching to a Cat 6 to see if that helps? You could...
  9. Netgear Netgear WNDR3400: Wep over wpa

    in XboX Networking Hardware
    Netgear Netgear WNDR3400: Wep over wpa: Netgear (Routers) Netgear WNDR3400: Wep over wpa my router is set up on wpa but my Xbox 360 is only letting me do wep and I don’t want to take down my password just for my Xbox...
  10. Netgear Netgear WNDR3400: Need help with my NAT type

    in XboX Networking Hardware
    Netgear Netgear WNDR3400: Need help with my NAT type: Netgear (Routers) Netgear WNDR3400: Need help with my NAT type I have been trying everything to get my NAT type open but nothing works because no one has the same NAT type as mine: NAT type:...