Netgear: Restore Factory Defaults

Discus and support Netgear: Restore Factory Defaults in XboX Networking Hardware to solve the problem; Netgear (Routers): Restore Factory Defaults Netgear WNR834B Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username -... Discussion in 'XboX Networking Hardware' started by XB1R Hades, May 9, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Netgear: Restore Factory Defaults


    Netgear (Routers): Restore Factory Defaults
    Netgear WNR834B

    Login Information

    Restore Factory Defaults

    Through firmware

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Login to router by entering http://routerlogin.net in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password. The default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an Ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.

    :)
     
    XB1R Hades, May 9, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Netgear: Restore Factory Defaults

    Netgear (Routers): Restore Factory Defaults
    Login Information

    • Gateway - 192.168.1.1, 10.0.0.1, or routerlogin.net
    • Username – admin
    • Password – password

    Netgear - Smart Wizard- Light Blue



    Restoring Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
    Netgear - Genie - Black/Purple



    Restoring Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the username and password.

      the default user name and password are: "admin", "password".
    4. Select the Advanced tab from the tabs at the top.
    5. Select Administration from menu on the left.
    6. From the submenu select Backup Settings.
    7. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XB1R Athena, May 9, 2014
    #2
  3. XB1R Apollo
    XB1R Apollo Guest
    Netgear: Restore Factory Defaults

    Netgear (Routers): Restore Factory Defaults
    Login Information

    • Gateway - 192.168.0.1 (v1-v5) or 192.168.1.1 (v6-v10)
    • Username - admin
    • Password - password

    Restore Factory Defaults

    Through firmware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Login to router by entering
      http://routerlogin.net
      in to the address bar or by entering the default gateway IP address.
    3. The router will then prompt you to enter the user name and password.the default user name and password are: "admin", "password".
    4. From the left hand menu select Backup Settings.
    5. Select the Erase option under where it says Revert to factory default settings.
    Through Hardware

    1. Plug the computer into a LAN port via an ethernet cable.
    2. Locate the reset button on the device.
    3. With paperclip/pen/toothpick hold down the reset button down for 30 seconds.
    4. Wait for lights to turn off then return to normal.
     
    XB1R Apollo, May 9, 2014
    #3
  4. taidara Win User

    New xbox slim - no wireless networks found

    Greetings Bunny Assassins!

    Have you tried to restore (reset) the Netgear power adapters back to factory defaults and then pair them up again?
  5. Wo0dsiE Win User

    Netgear: Restoring Defaults

    The only thing that worked for me when I started having connect to xboxlive problems is restoring factory defaults on my router. I did it the easy way, I reset used the reset button in the back. (press it with a paper clip until the power button starts blinking...
    only took mine less than five seconds) the router does the rest. Make sure you set the wireless security back to WPA2 (strongest). Then create your password. I'm back playing ghosts again with no issues. Not sure how it got out of whack and I was ready to
    go buy a new one, but all is good now.
  6. OxbowPolecat562 Win User

    Restore Factory Defaults

  7. debbiemccoy Win User

    2Wire: Restore Factory Defaults

    Thank you for your information!
  8. onyxishere Win User

    SMC: Restore Factory Defaults

    Please do not post personal info including username and password on the forums. Others can see it and use it against you.
Thema:

Netgear: Restore Factory Defaults

Loading...
  1. Netgear: Restore Factory Defaults - Similar Threads - Netgear Restore Factory

  2. Netgear Netgear DGN3500: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear Netgear DGN3500: Restore Factory Defaults: Netgear (Modems/Gateways) Netgear DGN3500: Restore Factory Defaults Login Information Gateway - 192.168.0.1 Username - admin Password - password Restore Factory Defaults Through firmware...
  3. Netgear Netgear DGN2200: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear Netgear DGN2200: Restore Factory Defaults: Netgear (Modems/Gateways) Netgear DGN2200: Restore Factory Defaults Netgear DGN2200 Login Information Gateway - 192.168.0.1 Username - admin Password - password Netgear SmartWizard Restore...
  4. Netgear Netgear DGN1000/DGN1000SP: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear Netgear DGN1000/DGN1000SP: Restore Factory Defaults: Netgear (Modems/Gateways) Netgear DGN1000/DGN1000SP: Restore Factory Defaults Netgear DGN1000 Login Information Gateway - 192.168.0.1 Username - admin Password - password Restore Factory...
  5. Netgear: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear: Restore Factory Defaults: Netgear (Routers): Restore Factory Defaults Restore Factory Defaults Through firmware Plug the computer into a LAN port via an Ethernet cable. Login to router by entering...
  6. Netgear Netgear CG3100D: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear Netgear CG3100D: Restore Factory Defaults: Netgear (Modems/Gateways) Netgear CG3100D: Restore Factory Defaults Netgear CG3100D Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Restore Factory...
  7. Netgear Netgear DGND3700: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear Netgear DGND3700: Restore Factory Defaults: Netgear (Modems/Gateways) Netgear DGND3700: Restore Factory Defaults Netgear DGND3700 Login Information: Default Gateway - 192.168.0.1 Username – admin Password – password Restore...
  8. Netgear: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear: Restore Factory Defaults: Netgear (Routers): Restore Factory Defaults Netgear WNR834M Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart...
  9. Netgear: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear: Restore Factory Defaults: Netgear (Routers): Restore Factory Defaults Netgear WNDR4000 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Netgear Smart...
  10. Netgear: Restore Factory Defaults

    in XboX Networking Hardware
    Netgear: Restore Factory Defaults: Netgear (Routers): Restore Factory Defaults Netgear MR814 Login Information Gateway - 192.168.1.1, 10.0.0.1, or http://routerlogin.net Username - admin Password - password Restore Factory...