Siemens: Bridging Guide

Discus and support Siemens: Bridging Guide in XboX Networking Hardware to solve the problem; Siemens (Modems/Gateways): Bridging Guide Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup)... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Sep 12, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Siemens: Bridging Guide


    Siemens (Modems/Gateways): Bridging Guide
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – (created during initial setup)
    Bridging Guide



    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
    4. 192.168.254.254/brgmode.htm
    5. Click the Apply button.
    6. Click the Reboot button.

    :)
     
    XB1R Hades, Sep 12, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Siemens: Bridging Guide

    Siemens (Modems/Gateways): Bridging Guide
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – admin/wirelessdsl



    Bridging Guide

    *Contact ISP for bridging instructions if supported.*
     
    XB1R Athena, Sep 12, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Siemens: Bridging Guide

    Siemens (Modems/Gateways): Bridging Guide
    Siemens Gigaset SE567



    Standard Version

    Login Information

    Gateway - 192.168.254.254

    Username - admin

    Password – admin



    Bridging Guide



    1. Plug the computer into a LAN port via an ethernet cable.
    2. Open a web browser.
    3. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted, enter in “admin” for the username and “admin” or “wirelessdsl” for the password.
    4. Click on ‘ISP Connection.’
    5. Click ‘Advanced Settings’, then click ‘Configure the ATM Virtual Circuit.’
    6. Click ‘Add a New VC.’
    7. Set the VPI to 0 and the VCI to 35 (These could be different, check with the previously used VC to confirm). Click ‘Next.’
    8. Select ‘RFC-2684 Bridged’ and Click Next.
    9. Enter a name for the connection (or just leave the default) and click Next then click Finish.
    10. Delete all of the VCs except the one you just created. (you can always restore defaults)
    11. Make sure the new VC is Enabled and Reboot the modem.


    Telus Version

    Login Information

    Gateway - 192.168.1.254

    Username - admin

    Password – telus



    Bridging Guide



    1. First reset your SE567 to its factory settings. Hold the reset button on the bottom in until the power light starts alternating green and red.
    2. Plug the computer into a LAN port via an ethernet cable.
    3. Open a web browser.
    4. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted enter the “admin” for the username and “telus” for the password if the gateway asks.
    5. Go through the Setup Wizard (or manually, your choice) and configure your security and any other settings the way you want them. When you are done you will be asked to reboot.
    6. Go to the above URL and log in once again.
    7. Go to the following URL to turn on bridge mode: »192.168.1.254/brgmode.htm This URL is not anywhere in the settings, you will have to go there manually. You will be asked to reboot the SE567 once again.
    8. After rebooting, unplug your computer from port 1 and plug your WAN connection into port 4. You should now be able to access the SE567 with your laptop and the security settings you applied to it.
     
    XB1R Athena, Sep 12, 2014
    #3
  4. Wicked Solitude Win User

    Bridging Guide

    I already switched the nat to bridged before seeing this and now I cannot login to the router via 192.168.0.1
  5. THE GAME KANG Win User

    Bridging Guide

    so this is for using a router with this device(NVG510)? because if thats the case I have a D-link GamerLounge(DGL-4500). if i were to bridge these two would it help my nat type for 2 xbox ones?
  6. Wicked Solitude Win User

    Bridging Guide

    I can't switch it back. Now there is no network
  7. IHEROBRINE0 Win User

    Bridging Guide

    I receive a message stating that doing this limits my internet capability. I was unable to bring up an internet page after doing this.
  8. MatthewHendricks Win User

    Arris: Bridging Guide

    That's not true. I just found bridging under the NAT settings in my gateways settings page.
Thema:

Siemens: Bridging Guide

Loading...
  1. Siemens: Bridging Guide - Similar Threads - Siemens Bridging Guide

  2. Siemens: i put my gift card on the wrong account

    in XboX Networking Hardware
    Siemens: i put my gift card on the wrong account: Siemens (Modems/Gateways): i put my gift card on the wrong account Hey LickMyChevy, Unfortunately once a Card is redeemed to an Account your not able to transfer it to a different one. It needs...
  3. Siemens: Known Issues

    in XboX Networking Hardware
    Siemens: Known Issues: Siemens (Modems/Gateways): Known Issues Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Known Issues No known issues...
  4. Siemens: Multiple Console Support

    in XboX Networking Hardware
    Siemens: Multiple Console Support: Siemens (Modems/Gateways): Multiple Console Support Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Multiple Console Support We...
  5. Siemens: Restore Defaults

    in XboX Networking Hardware
    Siemens: Restore Defaults: Siemens (Modems/Gateways): Restore Defaults Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Restore Defaults *Please have PPPoE...
  6. Siemens: Firmware

    in XboX Networking Hardware
    Siemens: Firmware: Siemens (Modems/Gateways): Firmware Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) How to Find Firmware Version Not Available....
  7. Siemens: Firewall

    in XboX Networking Hardware
    Siemens: Firewall: Siemens (Modems/Gateways): Firewall Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Firewall Open a web browser. Enter...
  8. Siemens: Port Forwarding

    in XboX Networking Hardware
    Siemens: Port Forwarding: Siemens (Modems/Gateways): Port Forwarding Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Port Forwarding Open a web browser....
  9. Siemens: DMZ

    in XboX Networking Hardware
    Siemens: DMZ: Siemens (Modems/Gateways): DMZ Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) DMZ Open a web browser. Enter...
  10. Siemens: UPnP

    in XboX Networking Hardware
    Siemens: UPnP: Siemens (Modems/Gateways): UPnP Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) UPnP Open a web browser. Enter...