Siemens: Firewall

Discus and support Siemens: Firewall in XboX Networking Hardware to solve the problem; Siemens (Modems/Gateways): Firewall Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup)... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Sep 12, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Siemens: Firewall


    Siemens (Modems/Gateways): Firewall
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – (created during initial setup)
    Firewall



    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
    3. Under the section titled setup, select firewall from the menu on the left and then filter ruled from the submenu.
    4. Uncheck enabled attack detection system.
    5. Select Apply.

    :)
     
    XB1R Hades, Sep 12, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Siemens: Firewall

    Siemens (Modems/Gateways): Firewall
    Siemens Gigaset SE567



    Standard Version

    Login Information

    Gateway - 192.168.254.254

    Username - admin

    Password – admin



    Firewall



    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and admin for the password if the gateway asks.
    3. Under the section titled setup, select firewall from the menu on the left and then filter ruled from the submenu.
    4. Uncheck enabled attack detection system.
    5. Select Apply.


    Telus Version

    Login Information

    Gateway - 192.168.1.254

    Username - admin

    Password – telus



    Firewall



    1. Open a web browser.
    2. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted enter the “admin” for the username and “telus” for the password if the gateway asks.
    3. Select Advanced Settings from the menu at the top.
    4. Under the section titled setup, select firewall from the menu on the left.
    5. In the drop-down box, select off.
    6. Select Apply.
     
    XB1R Athena, Sep 12, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Siemens: Firewall

    Siemens (Modems/Gateways): Firewall
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – admin/wirelessdsl



    Firewall

    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted, enter in “admin” for the username and “admin” or “wirelessdsl”
      for the password.
    3. Select Gateway from the menu at the top.
    4. Select Security on the left.
    5. Select the Customize button next to Level.
    6. Select Low or Off in the drop down menu.
    7. Select Apply.
     
    XB1R Athena, Sep 12, 2014
    #3
  4. taidara Win User

    Network behind a port symmetric nat

    Greetings Zero!

    Is your console directly connected to the siemens se567?

    Could you access your router's utility interface and turn off/disable the firewall. Save/Apply and reboot your gateway.

    Post back and let us know how that goes.
  5. VibroPlex Win User

    Homeland Security says Turn Off UPnP: What to do? Please advise.

    "A remote, unauthenticated attacker may be able to execute arbitrary code on the device or cause a denial of service." Love it.



    So we know as per the weblink above fixes are needed for routers from Cisco/Linksys, D-Link, Fujitsu, Huawei, ipitomy, NEC, Siemens and Sony, and that we don't know about Belkin and other router and gateway makers.



    Until we know those routers have fixed the security hole, we need to 'deploy
    firewall rules to block untrusted hosts from being able to access port 1900/udp'.
  6. VibroPlex Win User

    Xbox connects to internet, fails connecting to XBL

    Some NAT problems are subtle and don't appear in the Test Xbox Live Connection test. Most likely there's a port blocked... ports can be blocked in your router, modem, or at your ISP. Since the Xbox 360 uses different ports than PCs & Macs use, you can't
    see the effect of a port blockage except on the Xbox. A sequential power cycle is the first step in clearing a port blockage:

    1) turn off the Xbox then

    2) unplug the power from the Siemens.

    3) Wait at least 30 secs then replug the Siemens power.

    5) Wait 'til the light on the front of the Siemens which says DSL is on solid (not flashing), then turn on the Xbox.

    If that does not resolve it, then the next step is to make sure UPnP is enabled. I see your Siemens uses 192.168.1.1 as the IP address, so go to a web browser (IE, Firefox and Safari preferred), enther the IP address in the address bar, and go to the control
    panel of the Siemens, then find the UPnP setting and make sure that's enabled.

    If that does not resolve it, then set up Port Triggering to make sure port 3074 opens up for UDP and TCP and port 88 opens up for UDP when the Xbox needs it.
  7. MURGANATOR1 Win User

    Firewall

    If I disabled the I get a strick Nat but when I enable it and put the Xbox on power saving mode I get an Open Nat ..share
  8. ThEMighTyTUNs Win User

    Firewall

    Thanks a combination of this and forwarding port 3074 solved my issues with BO3 AB...EF erroor. Thanks
Thema:

Siemens: Firewall

Loading...
  1. Siemens: Firewall - Similar Threads - Siemens Firewall

  2. Siemens: i put my gift card on the wrong account

    in XboX Networking Hardware
    Siemens: i put my gift card on the wrong account: Siemens (Modems/Gateways): i put my gift card on the wrong account Hey LickMyChevy, Unfortunately once a Card is redeemed to an Account your not able to transfer it to a different one. It needs...
  3. Siemens: Known Issues

    in XboX Networking Hardware
    Siemens: Known Issues: Siemens (Modems/Gateways): Known Issues Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Known Issues No known issues...
  4. Siemens: Multiple Console Support

    in XboX Networking Hardware
    Siemens: Multiple Console Support: Siemens (Modems/Gateways): Multiple Console Support Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Multiple Console Support We...
  5. Siemens: Bridging Guide

    in XboX Networking Hardware
    Siemens: Bridging Guide: Siemens (Modems/Gateways): Bridging Guide Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Bridging Guide Plug the computer into a...
  6. Siemens: Restore Defaults

    in XboX Networking Hardware
    Siemens: Restore Defaults: Siemens (Modems/Gateways): Restore Defaults Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Restore Defaults *Please have PPPoE...
  7. Siemens: Firmware

    in XboX Networking Hardware
    Siemens: Firmware: Siemens (Modems/Gateways): Firmware Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) How to Find Firmware Version Not Available....
  8. Siemens: Port Forwarding

    in XboX Networking Hardware
    Siemens: Port Forwarding: Siemens (Modems/Gateways): Port Forwarding Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Port Forwarding Open a web browser....
  9. Siemens: DMZ

    in XboX Networking Hardware
    Siemens: DMZ: Siemens (Modems/Gateways): DMZ Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) DMZ Open a web browser. Enter...
  10. Siemens: UPnP

    in XboX Networking Hardware
    Siemens: UPnP: Siemens (Modems/Gateways): UPnP Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) UPnP Open a web browser. Enter...