Siemens: Port Forwarding

Discus and support Siemens: Port Forwarding in XboX Networking Hardware to solve the problem; Siemens (Modems/Gateways): Port Forwarding Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup)... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Sep 12, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Siemens: Port Forwarding


    Siemens (Modems/Gateways): Port Forwarding
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – (created during initial setup)
    Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
    3. Under the section titled setup, select port forwarding from the menu on the left.
    4. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    5. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    6. Select Apply.


    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
    3. Under the section titled setup, select port forwarding from the menu on the left.

    :)
     
    XB1R Hades, Sep 12, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Siemens: Port Forwarding

    Siemens (Modems/Gateways): Port Forwarding
    Siemens Gigaset SE567



    Standard Version

    Login Information

    Gateway - 192.168.254.254

    Username - admin

    Password – admin



    Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and admin for the password if the gateway asks.
    3. Under the section titled setup, select port forwarding from the menu on the left.
    4. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    5. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    6. Select Apply.


    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and admin for the password if the gateway asks.
    3. Under the section titled setup, select port forwarding from the menu on the left.
    4. Click the Delete button next to the entry that refers to port number 3074.


    Telus Version

    Login Information

    Gateway - 192.168.1.254

    Username - admin

    Password – telus



    Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted enter the “admin” for the username and “telus” for the password if the gateway asks.
    3. Select Advanced Settings from the menu at the top.
    4. Select Internet
    5. Select Port Forwarding from the menu on the left.
    6. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    7. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    8. Select Apply.


    Disable Port Forwarding



    1. Open a web browser.
    2. Enter http://192.168.1.254 into the address bar. (Or click the link) When prompted enter the “admin” for the username and “telus” for the password if the gateway asks.
    3. Select Advanced Settings from the menu at the top.
    4. Select Internet
    5. Select Port Forwarding from the menu on the left.
    6. Select Delete under the delete column next to the Xbox (3074) entry.
    7. Click the Apply button at the bottom right of the page.
     
    XB1R Athena, Sep 12, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Siemens: Port Forwarding

    Siemens (Modems/Gateways): Port Forwarding
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – admin



    Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.254.254 into the address bar. When prompted enter admin for the user name and admin for the password.
    3. In the section that is titled Add/Edit Entry, select TCP from the drop-down menu and enter in “3074” for the boxes that say “TCP/UDP port(s)”.
    4. Select the button next to “redirect selected protocol/service to IP Address” and enter in the IP address of the console in the box to the right of it.
    5. Select Apply.
    Disable Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.254.254 into the address bar. When prompted enter admin for the user name and admin for the password.
    3. Find the port you want to remove and select Delete.
    4. Select Apply.
     
    XB1R Athena, Sep 12, 2014
    #3
  4. IIIN3CR0515III Win User

    Sagemcom Siemens Speedstream 4300: Port Forwarding

    By doing this will this make my NAT change from "Strict" to Open?
  5. VibroPlex Win User

    Xbox connects to internet, fails connecting to XBL

    Some NAT problems are subtle and don't appear in the Test Xbox Live Connection test. Most likely there's a port blocked... ports can be blocked in your router, modem, or at your ISP. Since the Xbox 360 uses different ports than PCs & Macs use, you can't
    see the effect of a port blockage except on the Xbox. A sequential power cycle is the first step in clearing a port blockage:

    1) turn off the Xbox then

    2) unplug the power from the Siemens.

    3) Wait at least 30 secs then replug the Siemens power.

    5) Wait 'til the light on the front of the Siemens which says DSL is on solid (not flashing), then turn on the Xbox.

    If that does not resolve it, then the next step is to make sure UPnP is enabled. I see your Siemens uses 192.168.1.1 as the IP address, so go to a web browser (IE, Firefox and Safari preferred), enther the IP address in the address bar, and go to the control
    panel of the Siemens, then find the UPnP setting and make sure that's enabled.

    If that does not resolve it, then set up Port Triggering to make sure port 3074 opens up for UDP and TCP and port 88 opens up for UDP when the Xbox needs it.
  6. taidara Win User

    Cant connect too most players

    Hey there Sludg!

    Can you confirm that your Siemens Model 4200 is just a cable modem and not with built in router. Just to rule out that your not having double NAT layers.

    You should also secure your wireless network.

    Make sure that your router's firmware is up to date.

    Just a note: When opening ports with Port Forwarding make sure you have disabled UPnP and DMZ.
  7. JLG12344 Win User

    Port Forwarding

    The Port Numbers that are listed here don't really make sense.... There are only three areas that port numbers can be placed in and only a max of 5 'characters', that includes a coma, that can be entered in the space provided. There is the Global Port Range
    {00000 - 00000} and then the Base Host Port {00000}. After this is done is there a reason to delete it all after words? or is this just something to know in the future?
  8. drkillbydeath88 Win User

    Port Forwarding

    When I input 3074 into the external start/end port and internal start/end port, an error pops up saying that the defined port or port range is in use by another port forwarding, applications or UPNP rule. Help?
Thema:

Siemens: Port Forwarding

Loading...
  1. Siemens: Port Forwarding - Similar Threads - Siemens Port Forwarding

  2. Siemens: i put my gift card on the wrong account

    in XboX Networking Hardware
    Siemens: i put my gift card on the wrong account: Siemens (Modems/Gateways): i put my gift card on the wrong account Hey LickMyChevy, Unfortunately once a Card is redeemed to an Account your not able to transfer it to a different one. It needs...
  3. Siemens: Known Issues

    in XboX Networking Hardware
    Siemens: Known Issues: Siemens (Modems/Gateways): Known Issues Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Known Issues No known issues...
  4. Siemens: Multiple Console Support

    in XboX Networking Hardware
    Siemens: Multiple Console Support: Siemens (Modems/Gateways): Multiple Console Support Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Multiple Console Support We...
  5. Siemens: Bridging Guide

    in XboX Networking Hardware
    Siemens: Bridging Guide: Siemens (Modems/Gateways): Bridging Guide Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Bridging Guide Plug the computer into a...
  6. Siemens: Restore Defaults

    in XboX Networking Hardware
    Siemens: Restore Defaults: Siemens (Modems/Gateways): Restore Defaults Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Restore Defaults *Please have PPPoE...
  7. Siemens: Firmware

    in XboX Networking Hardware
    Siemens: Firmware: Siemens (Modems/Gateways): Firmware Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) How to Find Firmware Version Not Available....
  8. Siemens: Firewall

    in XboX Networking Hardware
    Siemens: Firewall: Siemens (Modems/Gateways): Firewall Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Firewall Open a web browser. Enter...
  9. Siemens: DMZ

    in XboX Networking Hardware
    Siemens: DMZ: Siemens (Modems/Gateways): DMZ Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) DMZ Open a web browser. Enter...
  10. Siemens: UPnP

    in XboX Networking Hardware
    Siemens: UPnP: Siemens (Modems/Gateways): UPnP Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) UPnP Open a web browser. Enter...