Siemens: UPnP

Discus and support Siemens: UPnP in XboX Networking Hardware to solve the problem; Siemens (Modems/Gateways): UPnP Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) UPnP... Discussion in 'XboX Networking Hardware' started by XB1R Hades, Sep 12, 2014.

  1. XB1R Hades
    XB1R Hades Guest

    Siemens: UPnP


    Siemens (Modems/Gateways): UPnP
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – (created during initial setup)
    UPnP



    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted enter the admin for the username and your created password.
    3. Select UPnP from the left menu.
    4. Toggle UPnP.

    :)
     
    XB1R Hades, Sep 12, 2014
    #1
  2. XB1R Athena
    XB1R Athena Guest
    Siemens: UPnP

    Siemens (Modems/Gateways): UPnP
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – admin



    UPnP

    1. Open a web browser.
    2. Enter 192.168.254.254 into the address bar. When prompted enter admin for the user name and admin for the password.
    3. Under the section titled setup, select UPnP.
    4. Select enable full Internet Gateway Device Support.
    5. Select Apply.
     
    XB1R Athena, Sep 12, 2014
    #2
  3. XB1R Athena
    XB1R Athena Guest
    Siemens: UPnP

    Siemens (Modems/Gateways): UPnP
    Login Information

    • Gateway - 192.168.254.254
    • Username - admin
    • Password – admin/wirelessdsl



    UPnP

    1. Open a web browser.
    2. Enter http://192.168.254.254 into the address bar. (Or click the link) When prompted, enter in “admin” for the username and “admin” or “wirelessdsl”
      for the password.
    3. Select Gateway from the menu at the top.
    4. Select Home Network from the menu on the left.
    5. Select Advanced Settings.
    6. Select “Configure the Local SpeedStream Gateway UPnP”.
    7. Select Enable full Internet Gateway Device. (To turn off the UPnP select Disable UPnP)
    8. Select Apply.
    9. Click Reboot.
     
    XB1R Athena, Sep 12, 2014
    #3
  4. DrInnuendo Win User

    Disconnected from Xbox Live

    Make: Siemens Speedstream

    Model: 2624

    I've changed the wireless channel and I have enabled UPnP, but that was only yesterday when looking through what could be wrong. I have Comcast as my ISP.
  5. VibroPlex Win User

    Xbox connects to internet, fails connecting to XBL

    Some NAT problems are subtle and don't appear in the Test Xbox Live Connection test. Most likely there's a port blocked... ports can be blocked in your router, modem, or at your ISP. Since the Xbox 360 uses different ports than PCs & Macs use, you can't
    see the effect of a port blockage except on the Xbox. A sequential power cycle is the first step in clearing a port blockage:

    1) turn off the Xbox then

    2) unplug the power from the Siemens.

    3) Wait at least 30 secs then replug the Siemens power.

    5) Wait 'til the light on the front of the Siemens which says DSL is on solid (not flashing), then turn on the Xbox.

    If that does not resolve it, then the next step is to make sure UPnP is enabled. I see your Siemens uses 192.168.1.1 as the IP address, so go to a web browser (IE, Firefox and Safari preferred), enther the IP address in the address bar, and go to the control
    panel of the Siemens, then find the UPnP setting and make sure that's enabled.

    If that does not resolve it, then set up Port Triggering to make sure port 3074 opens up for UDP and TCP and port 88 opens up for UDP when the Xbox needs it.
  6. SpartanTroy417 Win User

    SERIOUSLY NEED HELP

    I live In Sacramento, California, my modem is Siemens Speedstream 4100, my router is cisco e2500, wireless connection, using a white external adapter, Unknown for UPnP and NAT, Probably DSL, ISP is AT&T, The Exact message is about the Wep or WPA and opening
    up the web page for the router.
  7. Zero Protocol Win User

    Network behind a port symmetric nat

    What Country/State/Province do you live in? alberta, canada

    Modem brand & model number: siemens gigaset se567

    Router brand & model number:

    Wired or wireless: wireless

    Things you have tried: disabled and enabled upnp, full reboot of gateway

    Is UPnP Enabled? Yes/no/Unknown. Yes

    Do you have a NAT error? If so, what is your NAT type? Strict says network is behind port symmetric nat

    Any Error Codes you encounter: 0x40002000064

    Who is your ISP?(Internet Service Provider): telus
  8. taidara Win User

    Cant connect too most players

    Hey there Sludg!

    Can you confirm that your Siemens Model 4200 is just a cable modem and not with built in router. Just to rule out that your not having double NAT layers.

    You should also secure your wireless network.

    Make sure that your router's firmware is up to date.

    Just a note: When opening ports with Port Forwarding make sure you have disabled UPnP and DMZ.
Thema:

Siemens: UPnP

Loading...
  1. Siemens: UPnP - Similar Threads - Siemens UPnP

  2. Siemens: i put my gift card on the wrong account

    in XboX Networking Hardware
    Siemens: i put my gift card on the wrong account: Siemens (Modems/Gateways): i put my gift card on the wrong account Hey LickMyChevy, Unfortunately once a Card is redeemed to an Account your not able to transfer it to a different one. It needs...
  3. Siemens: Known Issues

    in XboX Networking Hardware
    Siemens: Known Issues: Siemens (Modems/Gateways): Known Issues Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Known Issues No known issues...
  4. Siemens: Multiple Console Support

    in XboX Networking Hardware
    Siemens: Multiple Console Support: Siemens (Modems/Gateways): Multiple Console Support Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Multiple Console Support We...
  5. Siemens: Bridging Guide

    in XboX Networking Hardware
    Siemens: Bridging Guide: Siemens (Modems/Gateways): Bridging Guide Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Bridging Guide Plug the computer into a...
  6. Siemens: Restore Defaults

    in XboX Networking Hardware
    Siemens: Restore Defaults: Siemens (Modems/Gateways): Restore Defaults Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Restore Defaults *Please have PPPoE...
  7. Siemens: Firmware

    in XboX Networking Hardware
    Siemens: Firmware: Siemens (Modems/Gateways): Firmware Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) How to Find Firmware Version Not Available....
  8. Siemens: Firewall

    in XboX Networking Hardware
    Siemens: Firewall: Siemens (Modems/Gateways): Firewall Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Firewall Open a web browser. Enter...
  9. Siemens: Port Forwarding

    in XboX Networking Hardware
    Siemens: Port Forwarding: Siemens (Modems/Gateways): Port Forwarding Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) Port Forwarding Open a web browser....
  10. Siemens: DMZ

    in XboX Networking Hardware
    Siemens: DMZ: Siemens (Modems/Gateways): DMZ Login Information Gateway - 192.168.254.254 Username - admin Password – (created during initial setup) DMZ Open a web browser. Enter...