SmartRG: Firmware

Discus and support SmartRG: Firmware in XboX Networking Hardware to solve the problem; SmartRG (Modems/Gateways): Firmware SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Nov 19, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    SmartRG: Firmware


    SmartRG (Modems/Gateways): Firmware
    SmartRG SR350N

    Login Information:

    Default Gateway – 192.168.1.1/admin

    Username – admin

    Password – admin





    How to Find Firmware Version

    1. Open a web browser.
    2. Enter http://192.168.1.1/admin in the address bar and press enter.
    3. Enter “admin” for the username and “admin” for the password when prompted.
    4. Select Device Info.
    5. Your firmware version can be found next to Software Version.




    Firmware Update

    1. Open a web browser.
    2. Locate and download the firmware update, either from your ISP or SmartRG.
    3. Enter http://192.168.1.1/admin in the address bar and press enter.
    4. Enter “admin” for the username and “admin” for the password when prompted.
    5. Select Management.
    6. Select Update Software.
    7. Click the Browse button.
    8. Select the firmware file you downloaded earlier, click Ok.
    9. Click the Update Software button.

    :)
     
    XBR Poseidon, Nov 19, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    SmartRG: Device Manual

    SmartRG (Modems/Gateways): Device Manual
    SmartRG SR350N

    Login Information:

    Default Gateway – 192.168.1.1/admin

    Username – admin

    Password – admin





    Device Manual

    Click
    here
    for the manual.
     
    XBR Poseidon, Nov 19, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    SmartRG: Restoring Factory Defaults

    SmartRG (Modems/Gateways): Restoring Factory Defaults
    SmartRG SR350N

    Login Information:

    Default Gateway – 192.168.1.1/admin

    Username – admin

    Password – admin





    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter http://192.168.1.1/admin in the address bar and press enter.
    3. Enter “admin” for the username and “admin” for the password when prompted.
    4. Select Management.
    5. Select Settings.
    6. Select Restore Defaults.
    7. Click the Restore Default Settings button.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.
     
    XBR Poseidon, Nov 19, 2014
    #3
  4. supermm Win User

    como trocar o wpe,wpa e wpa2 [How to swap wpe, WPA and WPA2]

  5. IamSylxr Win User

    SmartRG: Port Forwarding

    Thanks for this!

    By the way, what was the 3074 for?
  6. SparkStormrider Win User

    Opening ports Smart RG

    With a SmartRG modem you will need to turn on UPnP to have an open NAT. By default it is not turned on. You'll have to contact your ISP and request it. That also goes for almost any other router. Usually enabling UPnP will change your NAT setting from
    moderate or strict, to open.
  7. XBF Ruben D Win User

    Firmware

    Hello there,

    Thank you for posting on Xbox Forums. In regards to this issue you may want to try a

    Soft Factory Reset of the console (Keep Games & Apps)
    . This will restore the system to factory defaults but will keep your games and apps in the system so that you don't have to reinstall anything.

    If you have any other questions please feel free to reply back letting us know. Thank you again for posting on Xbox Forums.
  8. Transk53 Win User

    Firmware

    Thank You,

    No, the problem has nothing to with a botched update, nor has it got anything to with network coverage etc. Sorry if my post was not understood, I maybe should put it differently. The download is fine and there are no network issues at any point, the problem
    is simply the amount of time the console is taking to address the data it has to update the console. Hence my question of whether there is a firmware issue, and maybe my console needs resetting back to factory default. A power of cycle is a good place to start,
    but will be ineffective as the update has already downloaded and taken over the console. A power cycle will not change this process. Hope I have been clearer.

    Thanks to all of you for your replies :)
Thema:

SmartRG: Firmware

Loading...
  1. SmartRG: Firmware - Similar Threads - SmartRG Firmware

  2. SmartRG SmartRG SR350N: Cannot get xbox 360 to connect wired or wireless after all sreps taken

    in XboX Networking Hardware
    SmartRG SmartRG SR350N: Cannot get xbox 360 to connect wired or wireless after all sreps taken: SmartRG (Modems/Gateways) SmartRG SR350N: Cannot get xbox 360 to connect wired or wireless after all sreps taken If you suddenly lost the ability to connect wired and wireless the console may have...
  3. SmartRG: How to change from ipv4 to ipv6

    in XboX Networking Hardware
    SmartRG: How to change from ipv4 to ipv6: SmartRG (Modems/Gateways): How to change from ipv4 to ipv6 how to change from ipv4 to ipv6 5e144f3e-c69f-4e22-b773-63692e9e7513
  4. SmartRG: Device Manual

    in XboX Networking Hardware
    SmartRG: Device Manual: SmartRG (Modems/Gateways): Device Manual SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin Device Manual Click here for the...
  5. SmartRG: Known Issues

    in XboX Networking Hardware
    SmartRG: Known Issues: SmartRG (Modems/Gateways): Known Issues SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin Known Issues There are no known issues...
  6. SmartRG: Multiple Console Support

    in XboX Networking Hardware
    SmartRG: Multiple Console Support: SmartRG (Modems/Gateways): Multiple Console Support SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin Multiple Console Support We...
  7. SmartRG: Bridging Guide

    in XboX Networking Hardware
    SmartRG: Bridging Guide: SmartRG (Modems/Gateways): Bridging Guide SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin Bridging Guide Open a web browser....
  8. SmartRG: Restoring Factory Defaults

    in XboX Networking Hardware
    SmartRG: Restoring Factory Defaults: SmartRG (Modems/Gateways): Restoring Factory Defaults SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin Restoring Factory Defaults...
  9. SmartRG: Firewall

    in XboX Networking Hardware
    SmartRG: Firewall: SmartRG (Modems/Gateways): Firewall SmartRG SR350N Login Information: Default Gateway – 192.168.1.1/admin Username – admin Password – admin Firewall *The firewall does not have any...
  10. SmartRG: Port Forwarding

    in XboX Networking Hardware
    SmartRG: Port Forwarding: SmartRG (Modems/Gateways): Port Forwarding Thanks for this! By the way, what was the 3074 for? 154476b2-50ce-4126-981c-a25b54c0251f