VirginMedia: Overview

Discus and support VirginMedia: Overview in XboX Networking Hardware to solve the problem; VirginMedia (Modems/Gateways): Overview Virgin SuperHub 2 Login Information: Default Gateway – 192.168.0.1 Username – *none* Password – changeme... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Oct 22, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    VirginMedia: Overview


    VirginMedia (Modems/Gateways): Overview
    Virgin SuperHub 2

    Login Information:

    Default Gateway – 192.168.0.1

    Username – *none*

    Password – changeme



    How to Find SSID (Network Name)

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. The wireless network name is found to the right of SSID. The 2.4Ghz network to the left and the 5GHz to the right.




    Alt. Instructions.

    1. Locate the sticker on the bottom of the device.
    2. Your 2.4Ghz and 5Ghz network names will be listed next to their respective frequency.


    How To Find Wireless Passphrase (WPA/WEP)

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. The Wireless Passphrase is found to the right of Passphrase or Security key. The 2.4Ghz network to the left and the 5GHz to the right.


    Alt. Instructions.

    1. Locate the sticker on the bottom of the device.
    2. The passphrase for your wireless network is listed to the right of Passphrase.


    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. Select Disable from the Security Mode drop down.
    7. Click the Save Settings button at the bottom of the page.




    MAC Filtering

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings at the bottom of the page.
    6. Select MAC Filtering from within the Security section.
    7. Check the Delete box next to all entries.
    8. Click the Apply button at the bottom of the page.


    Change Wireless Mode

    *Not Available*



    Change Wireless Channel

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. Select the desired channel from the Channel drop down. (Channels 1,3,9,11)


    DHCP Reservation

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select DHCP.
    7. Select DHCP Reservation.
    8. Enter a Device name the MAC Address of your console and the desired IP Address.
    9. Click the Apply button near the bottom of the screen.




    UPnP

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select UPnP.
    7. Check or Un-check the “Check to enable or uncheck to disable UPnP” box.
    8. Click the Apply button found near the bottom of the screen.


    DMZ

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select Security.
    7. Select DMZ.
    8. Check the “Check to enable or uncheck to disable your demilitarized zone”
    9. Enter the IP Address of your console.
    10. Click the Apply button at the bottom of the screen.


    Disable DMZ

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select Security.
    7. Select DMZ.
    8. Uncheck the “Check to enable or uncheck to disable your demilitarized zone”
    9. Click the Apply button at the bottom of the screen.


    Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced.
    6. Select Security.
    7. Select Port Forwarding.
    8. Enter a Name in the Section that describes this rule as pertaining to the Xbox.
    9. Set both the Start Port and End Port to 3074.
    10. Set the protocol drop down to TCP&UDP.
    11. Enter the IP Address of your Xbox console in the IP Address section.
    12. Click the Add Rule button.
    13. Enter a Name in the Section that describes this rule as pertaining to the Xbox.
    14. Set both the Start Port and End Port to 3544.
    15. Set the protocol drop down to UDP.
    16. Enter the IP Address of your Xbox console in the IP Address section.
    17. Click the Add Rule button.
    18. Click the Apply button at the bottom of the screen.




    Disable Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced.
    6. Select Security.
    7. Select Port Forwarding.
    8. Check the delete box next to any entries regarding Xbox.
    9. Click the Apply button found at the bottom of the screen.


    Firewall

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings, click Yes to continue.
    6. Select Firewall from under the Security section.
    7. Check the IP Sec Pass-Through box.
    8. Click the Apply button, then click Yes.


    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select Device Management.
    7. Select Reboot/Reset Device.
    8. Click the Restore to Factory Defaults box.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.


    How to Find Firmware Version

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.


    Firmware Update

    *This device’s firmware is updated automatically via the ISP.*



    Bridging Guide

    1. Connect our computer the Super Hub using and Ethernet cable.
    2. Open a web browser.
    3. Enter 192.168.0.1 in the address bar and press enter.
    4. Enter changeme when prompted for the password.
    5. Click the sign in button.
    6. Select Super Hub Settings.
    7. Select Modem Mode.
    8. Click the Enable Modem Mode button.
    9. Click Yes.




    Multiple Console Support

    We have no confirmed cases where multiple consoles were able to obtain an Open NAT state while using this device.



    Known Issues

    There are no known issues at this time.

    Device Manual

    There is no manual but most functions can be found via search
    here
    .

    :)
     
    XBR Poseidon, Oct 22, 2014
    #1
  2. XBIR Zeus
    XBIR Zeus Guest
    VirginMedia: Overview

    VirginMedia (Modems/Gateways): Overview
    Virgin SuperHub 2

    Login Information:

    Default Gateway – 192.168.0.1

    Username – *none*

    Password – changeme





    How To Find Wireless Passphrase (WPA/WEP)

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. The Wireless Passphrase is found to the right of Passphrase or Security key. The 2.4Ghz network to the left and the 5GHz to the right.


    Alt. Instructions.

    1. Locate the sticker on the bottom of the device.
    2. The passphrase for your wireless network is listed to the right of Passphrase.


    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. Select Disable from the Security Mode drop down.
    7. Click the Save Settings button at the bottom of the page.
    How to Find SSID (Network Name)

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. The wireless network name is found to the right of SSID. The 2.4Ghz network to the left and the 5GHz to the right.


    MAC Filtering

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings at the bottom of the page.
    6. Select MAC Filtering from within the Security section.
    7. Check the Delete box next to all entries.
    8. Click the Apply button at the bottom of the page.
    Change Wireless Mode

    *Not Available*

    Change Wireless Channel

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Wireless Network Settings.
    6. Select the desired channel from the Channel drop down. (Channels 1,3,9,11)
    DHCP Reservation

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select DHCP.
    7. Select DHCP Reservation.
    8. Enter a Device name the MAC Address of your console and the desired IP Address.
    9. Click the Apply button near the bottom of the screen.
    UPnP

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select UPnP.
    7. Check or Un-check the “Check to enable or uncheck to disable UPnP” box.
    8. Click the Apply button found near the bottom of the screen.
    DMZ

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select Security.
    7. Select DMZ.
    8. Check the “Check to enable or uncheck to disable your demilitarized zone”
    9. Enter the IP Address of your console.
    10. Click the Apply button at the bottom of the screen.


    Disable DMZ

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select Security.
    7. Select DMZ.
    8. Uncheck the “Check to enable or uncheck to disable your demilitarized zone”
    9. Click the Apply button at the bottom of the screen.
    Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced.
    6. Select Security.
    7. Select Port Forwarding.
    8. Enter a Name in the Section that describes this rule as pertaining to the Xbox.
    9. Set both the Start Port and End Port to 3074.
    10. Set the protocol drop down to TCP&UDP.
    11. Enter the IP Address of your Xbox console in the IP Address section.
    12. Click the Add Rule button.
    13. Enter a Name in the Section that describes this rule as pertaining to the Xbox.
    14. Set both the Start Port and End Port to 3544.
    15. Set the protocol drop down to UDP.
    16. Enter the IP Address of your Xbox console in the IP Address section.
    17. Click the Add Rule button.
    18. Click the Apply button at the bottom of the screen.




    Disable Port Forwarding

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced.
    6. Select Security.
    7. Select Port Forwarding.
    8. Check the delete box next to any entries regarding Xbox.
    9. Click the Apply button found at the bottom of the screen.
    Firewall

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings, click Yes to continue.
    6. Select Firewall from under the Security section.
    7. Check the IP Sec Pass-Through box.
    8. Click the Apply button, then click Yes.
    Firewall

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings, click Yes to continue.
    6. Select Firewall from under the Security section.
    7. Check the IP Sec Pass-Through box.
    8. Click the Apply button, then click Yes.
    Bridging Guide

    1. Connect our computer the Super Hub using and Ethernet cable.
    2. Open a web browser.
    3. Enter 192.168.0.1 in the address bar and press enter.
    4. Enter changeme when prompted for the password.
    5. Click the sign in button.
    6. Select Super Hub Settings.
    7. Select Modem Mode.
    8. Click the Enable Modem Mode button.
    9. Click Yes.
    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser.
    2. Enter 192.168.0.1 in the address bar and press enter.
    3. Enter changeme when prompted for the password.
    4. Click the sign in button.
    5. Select Advanced Settings.
    6. Select Device Management.
    7. Select Reboot/Reset Device.
    8. Click the Restore to Factory Defaults box.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.
    How to Find Firmware Version

    1. Connect our computer the Super Hub using and Ethernet cable.
    2. Open a web browser.
    3. Enter 192.168.0.1 in the address bar and press enter.
    4. Enter changeme when prompted for the password.
    5. Click the sign in button.
    6. Select Super Hub Settings.
    7. Select Modem Mode.
    8. The Firmware version can be found on this page.


    Firmware Update

    *This device’s firmware is updated automatically via the ISP.*

    Multiple Console Support

    We have no confirmed cases where multiple consoles were able to obtain an Open NAT state while using this device. Please comment on this page if you have been able obtain Open NAT on two or more consoles using this device.

    Known Issues

    This Gateway will sometimes cause issues connecting with cloud based games, resulting in a timeout with "Unable to join session" status message. This is due to the Gateway being configured to disable IPSec Pass-Through by default. IPSec Pass-Through is required
    to establish multi-player sessions. To resolve this issue, you must enable IPSec Pass-Through on the Gateway.

    Device Manual

    There is no manual but most functions can be found via search here.
     
    XBIR Zeus, Oct 22, 2014
    #2
  3. Ooh im good
    Ooh im good Guest
    Virginmedia major Routing/DPI failure.

    Virginmedia is currently and has been for the last 4 days suffering an major issue, the official line from Virginmedia is they are having a routing issue and UBI-Soft are currently telling Virgin customers having trouble with GR-FS to contact Virginmedia
    as its an issue on Virginmedia's end.

    This is just for your information and may help some use's. There is lots of information on Virginmedia official technical support forums with advice from Virginmedia's staff.
     
    Ooh im good, Oct 22, 2014
    #3
  4. Deltaman45 Win User

    Virginmedia major Routing/DPI failure.

    im with virginmedia and ive had no problems with GRFS.i do know that virginmedia are soon going to beta test new wireless drivers and updates to problem with iplayer for the xbox 360..forums.digitalspy.co.uk/showthread.php
  5. Grovesy1988 Win User

    A System update is needed to enter XBOX LIVE...

    RPachecoBR, are you with VirginMedia? There is another thread with a lot of people including myself experiencing the same issues...
  6. MetalGearFloppy Win User

    random stopping

    [quote user="Ooh im good"]

    Is your internet provider Virginmedia?

    [/quote]



    Shouldn't have anything to do with it....
  7. Deltaman45 Win User

    lovefilm app

    found out the problem.the virginmedia superhub was blocking domain names just needed to disable it.and it works now.
  8. MetalGearFloppy Win User

    ITV PLAYER OR TV CATCHUP FOR XBOX?

    MS should just stop fannying about and do a deal with Virginmedia, then there'd be no need for all these seperate apps for each channel.
Thema:

VirginMedia: Overview

Loading...
  1. VirginMedia: Overview - Similar Threads - VirginMedia Overview

  2. VirginMedia Superhub 2: wifi

    in XboX Networking Hardware
    VirginMedia Superhub 2: wifi: VirginMedia (Modems/Gateways) Superhub 2: wifi Hi, What's happening when you try to connect? Have you tried clearing the MAC address and resetting the router ? 11531482-63be-46e0-9264-f1b61a32bc4e
  3. VirginMedia Superhub 2: Configuration problems

    in XboX Networking Hardware
    VirginMedia Superhub 2: Configuration problems: VirginMedia (Modems/Gateways) Superhub 2: Configuration problems Hi Dan, I split your post and created a new thread for you and placed it in the correct category as well. This way we can assist...
  4. VirginMedia Superhub 2: Network Stats

    in XboX Networking Hardware
    VirginMedia Superhub 2: Network Stats: VirginMedia (Modems/Gateways) Superhub 2: Network Stats Awesome we're glad to hear that everything was solved. Don't hesitate to post again if you have any questions or concerns. Thank you for...
  5. VirginMedia Superhub 2: Xbox live

    in XboX Networking Hardware
    VirginMedia Superhub 2: Xbox live: VirginMedia (Modems/Gateways) Superhub 2: Xbox live I'm about to make a newer post that hopefully everyone will see but I was having the same exact problems along with MANY other gamers. The...
  6. VirginMedia Superhub 2: My ping in my games jumps from 20 to around 240 for around 10 seconds ...

    in XboX Networking Hardware
    VirginMedia Superhub 2: My ping in my games jumps from 20 to around 240 for around 10 seconds ...: VirginMedia (Modems/Gateways) Superhub 2: My ping in my games jumps from 20 to around 240 for around 10 seconds then goes back to normal again Try to get int to youre Router setings. Make first...
  7. VirginMedia Superhub 2: Conection problems

    in XboX Networking Hardware
    VirginMedia Superhub 2: Conection problems: VirginMedia (Modems/Gateways) Superhub 2: Conection problems Try a hard reset of the xbox hold the home button for 8 seconds till it completely shuts off and unplug the xbox for 5 minutes then...
  8. VirginMedia Superhub 2: New router causing game lag

    in XboX Networking Hardware
    VirginMedia Superhub 2: New router causing game lag: VirginMedia (Modems/Gateways) Superhub 2: New router causing game lag Check this link for a possible solution: https://support.xbox.com/en-US/xbox-one/networking/slow-performance-solution...
  9. VirginMedia Superhub 2: Can not put password in for wireless network

    in XboX Networking Hardware
    VirginMedia Superhub 2: Can not put password in for wireless network: VirginMedia (Modems/Gateways) Superhub 2: Can not put password in for wireless network Hi there, please try the manual power cycle steps like mentioned on the following link, be sure to wait at...
  10. VirginMedia: Overview

    in XboX Networking Hardware
    VirginMedia: Overview: VirginMedia (Modems/Gateways): Overview Virgin SuperHub 2 Login Information: Default Gateway – 192.168.0.1 Username – *none* Password – changeme How To Find Wireless Passphrase...