Zhone Zhone 6381-A2-GB23-10: Overview

Discus and support Zhone Zhone 6381-A2-GB23-10: Overview in XboX Networking Hardware to solve the problem; Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Overview Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin... Discussion in 'XboX Networking Hardware' started by XBR Poseidon, Jul 7, 2014.

  1. XBR Poseidon
    XBR Poseidon Guest

    Zhone Zhone 6381-A2-GB23-10: Overview


    Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Overview
    Zhone 6381-A2-GB23-10

    Login Information:

    Default Gateway – 192.168.1.1

    Username – Admin

    Password – Admin



    How to Find SSID (Network Name)

    This device is not capable of wireless.



    How To Find Wireless Passphrase (WPA/WEP)

    This device is not capable of wireless.



    Changing Wireless Security Type/ Disabling Wireless Security

    This device is not capable of wireless.



    MAC Filtering

    This device is not capable of wireless.



    Change Wireless Mode

    This device is not capable of wireless.



    Change Wireless Channel

    This device is not capable of wireless.



    DHCP Reservation

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced from the options across the top.
    5. Select LAN Clients from the menu at the left.
    6. Enter the desired IP Address in the Enter IP Address field.
    7. Enter a host name if you desire.
    8. Enter the MAC Address of your Xbox Console.
    9. Click the Apply button at the bottom of the page.
    10. Select Tools from the menu across the top.
    11. Select System Commands from the menu at the left.
    12. Click the Save All button to make the changes permanent.


    UPnP

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced from the tabs at the top.
    5. Select UPnP from the menu on the left.
    6. Toggle UPnP on or off depending on your need.
    7. Click the Apply button at the bottom of the screen.
    8. Select Tools from the tabs across the top.
    9. Select System Commands from the menu on the left.
    10. Click the Save All button.


    DMZ

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced from the menu across the top.
    5. Select Port Forwarding from the menu on the left.
    6. Select the IP Address of your Xbox console from the LAN IP drop down.
    7. Click the DMZ link.
    8. Click the Save/Apply button.
    9. Select Tools from the tabs across the top.
    10. Select System Commands from the menu on the left.
    11. Click the Save All button.


    Disable DMZ

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced from the menu across the top.
    5. Select Port Forwarding from the menu on the left.
    6. Select the IP Address of your Xbox console from the LAN IP drop down.
    7. Click the DMZ link.
    8. Remove the Xbox console from the LAN IP drop down.
    9. Click the Save/Apply button.
    10. Select Tools from the tabs across the top.
    11. Select System Commands from the menu on the left.
    12. Click the Save All button.


    Port Forwarding

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced from the menu across the top.
    5. Select Port Forwarding from the menu on the left.
    6. Select Custom Port Forwarding.
    7. Enter the IP Address of your Xbox console in the Server IP Address field.
    8. For all 4 port fields enter 3074.
    9. Set the protocol to both if available, if not create two rules one with UDP selected and another with TCP.
    10. Click the Save/Apply button.
    11. Select Tools from the tabs across the top.
    12. Select System Commands from the menu on the left.
    13. Click the Save All button.


    Disable Port Forwarding

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Advanced from the menu across the top.
    5. Select Port Forwarding from the menu on the left.
    6. Select Custom Port Forwarding.
    7. Select any entries regarding port 3074.
    8. Click the Remove button.
    9. Select Tools from the tabs across the top.
    10. Select System Commands from the menu on the left.
    11. Click the Save All button.


    Firewall

    *The firewall does not have any adjustable options.*



    Restoring Factory Defaults

    Through Firmware

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Management from the menu on the left.
    5. Select Settings from the submenu.
    6. Select Restore Default from the resulting menu.
    7. Click the Restore Default Settings button.
    8. Click Ok on the pop up window.


    Through Hardware

    1. Locate the reset button on the back of the device.
    2. Press and hold the reset button for aprox. 5 seconds.
    3. Release the button and wait for the device to restart.


    How to Find Firmware Version

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. Select Status from the menu across the top.
    5. The Firmware version is found to the right of Software Version.


    Firmware Update

    1. Locate the updated firmware file either from
      http://www.zhone.com/support/
      or from your internet service provider.
    2. Connect a LAN cable from your pc to the gateway.
    3. Open a web browser and type http://192.168.1.1 .
    4. Enter admin for both the Username and Password.
    5. Click the Login button found in the lower right corner of the screen.
    6. Select Tools from the menu across the top.
    7. Select Update Gateway from the menu on the left..
    8. Click the Browse button.
    9. Select the file that you obtained from your internet service provider.
    10. Click the Upload Software button.


    Bridging Guide

    1. Open a web browser and type http://192.168.1.1 .
    2. Enter admin for both the Username and Password.
    3. Click the Login button found in the lower right corner of the screen.
    4. From the Home page, click on Setup.
    5. Click on New Connection. The default PPPoE connection setup is displayed.
    6. At the Type field select Bridge and the Bridge connection setup page is displayed.
    7. Give your Bridge connection a unique name; the name must not have spaces and cannot begin with numbers.
    8. Set the PVC Sharing to Enable.
    9. Enter a VPI and VCI. (Your DSL service provider or your ISP will supply these.)
    10. Select the encapsulation type (LLC or VC); if you are not sure which to use, use the default mode.
    11. Select the quality of service (QoS). Leave the default value if you are unsure or the ISP did not provide this information.
    12. Click Apply.
    13. Select Tools from the menu across the top.
    14. Select System Commands from the menu at the left.
    15. Click the Save All button to make the changes permanent.




    Multiple Console Support

    We have confirmed that this network device is unable to support more than one console with an Open NAT.



    Known Issues

    There are no known issues at this time.

    Device Manual

    Click
    here
    for the manual.

    :)
     
    XBR Poseidon, Jul 7, 2014
    #1
  2. XBR Poseidon
    XBR Poseidon Guest
    Zhone Zhone 6381-A2-GB23-10: MAC Filtering

    Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: MAC Filtering
    Zhone 6381-A2-GB23-10

    Login Information:

    Default Gateway – 192.168.1.1

    Username – Admin

    Password – Admin



    MAC Filtering

    This device is not capable of wireless.
     
    XBR Poseidon, Jul 7, 2014
    #2
  3. XBR Poseidon
    XBR Poseidon Guest
    Zhone Zhone 6381-A2-GB23-10: Known Issues

    Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Known Issues
    Zhone 6381-A2-GB23-10

    Login Information:

    Default Gateway – 192.168.1.1

    Username – Admin

    Password – Admin



    Known Issues

    There are no known issues at this time.
     
    XBR Poseidon, Jul 7, 2014
    #3
  4. ARCTIC GHO5T Win User

    Cannot connect to since December

    Addendum: the modem is a Zhone, model# 6381-A4-200-0AC
  5. VibroPlex Win User

    keep disconnecting from xbox live

  6. bransonb3 Win User

    NAT type help and randomly getting disconnected

    I forgot to say that the Zhone is in bridge mode or so I was told by North State.

    I tried power cycleing but tat didn't help.
  7. taidara Win User

    NAT Error Moderate Setting Need help fixing it

    Greetings Valarie!

    Did you connect your console to the Zhone (6519-A2-xx) before you moved, or is this a new device, deployed by your ISP (Internet Service Provider)?

    Who is your ISP?

    Could we start with something as simple as determine if your public/WAN address is an address that can reach the Internet from your WAN interface, or if its actually a private address NAT'd within the private realm of your ISP.

    Just to rule out the possibility, if your connection are behind a Large Scale NAT (LSN) architecture, could you access the web-uitlity interface of your Zhone gateway and see if you can find the WAN/Internet IP address, which is the address assigned by your
    ISP.

    Take a note of the WAN/Internet IP address and go to
    http://checkip.dyndns.com/


    Now, if this 'Current Address' don't match the WAN/Internet IP address that you see on your Zhone, then you're in a topologie that involves multiple levels of NAT. Multiple levels of NAT, or double NAT, don't support UDP (User Datagram Protocol) over NAT traversal.

    Post back and let us know how that goes and we'll work from there.

    Thank you!
  8. GMAN990 Win User

    NAT type help and randomly getting disconnected

    Hi,

    Your problem is that you are "doubt NAT'ing"

    Your Zhone is a router and running NAT

    Your Juniper also runs NAT

    Your best bet is to establish whether your can put the Zhone in "bridge mode" and hand off any PPPoE authentication (if your ISP uses it) to the Juniper

    Then all you need to do is open the xbox live ports on the Juniper, but as it currently stands it won't work, the Xbox is hidden behind two many NAT'd layers.
Thema:

Zhone Zhone 6381-A2-GB23-10: Overview

Loading...
  1. Zhone Zhone 6381-A2-GB23-10: Overview - Similar Threads - Zhone Zhone 6381

  2. Zhone Zhone 6381-A2-GB23-10: Known Issues

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: Known Issues: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Known Issues Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin Known Issues There are...
  3. Zhone Zhone 6381-A2-GB23-10: Multiple Console Support

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: Multiple Console Support: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Multiple Console Support Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin Multiple...
  4. Zhone Zhone 6381-A2-GB23-10: Bridging Guide

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: Bridging Guide: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Bridging Guide Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin Bridging Guide Open...
  5. Zhone Zhone 6381-A2-GB23-10: Firmware

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: Firmware: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Firmware Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin How to Find Firmware...
  6. Zhone Zhone 6381-A2-GB23-10: Restoring Factory Defaults

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: Restoring Factory Defaults: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Restoring Factory Defaults Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin Restoring...
  7. Zhone Zhone 6381-A2-GB23-10: Firewall

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: Firewall: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Firewall Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin Firewall *The firewall...
  8. Zhone Zhone 6381-A2-GB23-10: Port Forwarding

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: Port Forwarding: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: Port Forwarding Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin Port Forwarding...
  9. Zhone Zhone 6381-A2-GB23-10: DMZ

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: DMZ: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: DMZ Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin DMZ Open a web browser and...
  10. Zhone Zhone 6381-A2-GB23-10: UPnP

    in XboX Networking Hardware
    Zhone Zhone 6381-A2-GB23-10: UPnP: Zhone (Modems/Gateways) Zhone 6381-A2-GB23-10: UPnP Zhone 6381-A2-GB23-10 Login Information: Default Gateway – 192.168.1.1 Username – Admin Password – Admin UPnP Open a web browser and...