Zyxel Zyxel Prestige 841: Bridging Guide/ Entering PPPoE

Discus and support Zyxel Zyxel Prestige 841: Bridging Guide/ Entering PPPoE in XboX Networking Hardware to solve the problem; Zyxel (Modems/Gateways) Zyxel Prestige 841: Bridging Guide/ Entering PPPoE Login Information To login and configure the P-841 you will need a computer... Discussion in 'XboX Networking Hardware' started by XB1R Hydros, Jul 10, 2014.

  1. XB1R Hydros
    XB1R Hydros Guest

    Zyxel Zyxel Prestige 841: Bridging Guide/ Entering PPPoE


    Zyxel (Modems/Gateways) Zyxel Prestige 841: Bridging Guide/ Entering PPPoE
    Login Information

    To login and configure the P-841 you will need a computer with terminal emulation software configured. You will also need to use the Command Line to configure the device. It is suggested that you replace this device by contacting your Internet Service Provider
    (ISP).

    • Username: none
    • Password: 1234
    Entering PPPoE

    This device does not have this feature.

    :)
     
    XB1R Hydros, Jul 10, 2014
    #1
  2. XBIR Zeus
    XBIR Zeus Guest
    Zyxel Zyxel Prestige 841: Device Manual

    Zyxel (Modems/Gateways) Zyxel Prestige 841: Device Manual
    Zyxel Prestige 841

    Device Manual can be found here: ftp://ftp.zyxel.com/P-841/user_guide/P-841_841-25_v1.pdf (please copy paste this into your web browser).
     
    XBIR Zeus, Jul 10, 2014
    #2
  3. XB1R Hydros
    XB1R Hydros Guest
    Zyxel Zyxel Prestige 841: Known Issues

    Zyxel (Modems/Gateways) Zyxel Prestige 841: Known Issues
    Known Issues

    There are no currently known issues with this device.
     
    XB1R Hydros, Jul 10, 2014
    #3
  4. GMAN990 Win User

    ICMP Error

    Hi

    The Zyxel is a modem/router have you bridged the modem because if not you will suffer issues as you have two devices that are both NAT'ing otherwise , the Zyxel and the Netgear

    If you are not sure about bridging please contact your ISP as you may need additional details (PPPoE username/password) to enter into your Netgear before the change will work
  5. jmcode Win User

    Double NAT problems (I Think)

    Just to be clear, when you disabled DHCP on the Belkin, did you then connect the Zyxel to a LAN port on the Belkin? Did you verify the IP you used for port forwarding on the Zyxel was the new IP the Xbox One got from the Zyxel, not the one it had from the
    Belkin? If so, that should work unless something else is going on--can you get open NAT with the Xbox One directly wired to the Zyxel (with ports forwarded)? If not, that is a problem.

    As far as settings for bridge mode, I'm not familiar with your ISP so I'm not sue which setting is best on the Zyxel. On the Belkin, you need to match the current ISP setting on the Zyxel--i.e. if Zyxel is using PPPoE, set the Belkin to that. You will probably
    need to enter authentication (user/pass) depending on what that setting is...
  6. jmcode Win User

    Double NAT problems (I Think)

    Yes, the Zyxel is a gateway (modem+router), and you have problematic double NAT as a result. If you have access to the right settings, you can put the Zyxel in bridge mode as explained on page 22 of the manual here:

    ftp.zyxel.com/.../P-660RU-T1%20v3s_1.01.pdf

    This is the best solution, but your ISP may block those settings. If it does, and if it is unwilling to set it to bridge mode for you, another option is to disable DHCP on the Belkin and connect the Zyxel to a LAN port on the Belkin rather than WAN. Reboot
    Zyxel, Belkin, Xbox, and Xbox should get an IP from the Zyxel via DHCP (reserve this IP if the Zyxel supports that). You will then need to do all necessary port forwarding to the Xbox using the Zyxel unless the Zyxel properly implements UPnP (in which case
    enable that).
  7. taidara Win User

    Suddenly can't connect to Internet on 360

    Greetings Phane7!

    May I ask, is your ZyXEL C1000Z operating in bridge mode, or router/NAT mode?

    If it's possible, can you try connect your Xbox directly in to the ZyXEL C1000Z, and verify if you can connect properly to Live, or not.

    Thanks!
  8. mike101194-4FA2A2A4- Win User

    Double NAT problems (I Think)

    got it working turned out that i had pnp enabled on the zyxel which was overwriting the port fowarding settings i had setup. couldnt get bridge mode to work between the belkin and the zyxel but the turning of dhcp done the trick. Thanks GZA
Thema:

Zyxel Zyxel Prestige 841: Bridging Guide/ Entering PPPoE

Loading...
  1. Zyxel Zyxel Prestige 841: Bridging Guide/ Entering PPPoE - Similar Threads - Zyxel Zyxel Prestige

  2. Zyxel Zyxel Prestige 841: Overview

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: Overview: Zyxel (Modems/Gateways) Zyxel Prestige 841: Overview Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You will also need to...
  3. Zyxel Zyxel Prestige 841: How to Find SSID

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: How to Find SSID: Zyxel (Modems/Gateways) Zyxel Prestige 841: How to Find SSID (Network Name) Login Information To login and configure the P-841 you will need a computer with terminal emulation software...
  4. Zyxel Zyxel Prestige 841: Wireless Security

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: Wireless Security: Zyxel (Modems/Gateways) Zyxel Prestige 841: Wireless Security Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You will...
  5. Zyxel Zyxel Prestige 841: MAC Filtering

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: MAC Filtering: Zyxel (Modems/Gateways) Zyxel Prestige 841: MAC Filtering Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You will also...
  6. Zyxel Zyxel Prestige 841: Change Wireless Channel

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: Change Wireless Channel: Zyxel (Modems/Gateways) Zyxel Prestige 841: Change Wireless Channel Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You...
  7. Zyxel Zyxel Prestige 841: Change Wireless Mode

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: Change Wireless Mode: Zyxel (Modems/Gateways) Zyxel Prestige 841: Change Wireless Mode Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You will...
  8. Zyxel Zyxel Prestige 841: DHCP Reservation

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: DHCP Reservation: Zyxel (Modems/Gateways) Zyxel Prestige 841: DHCP Reservation Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You will also...
  9. Zyxel Zyxel Prestige 841: UPnP

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: UPnP: Zyxel (Modems/Gateways) Zyxel Prestige 841: UPnP Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You will also need to use...
  10. Zyxel Zyxel Prestige 841: DMZ

    in XboX Networking Hardware
    Zyxel Zyxel Prestige 841: DMZ: Zyxel (Modems/Gateways) Zyxel Prestige 841: DMZ Login Information To login and configure the P-841 you will need a computer with terminal emulation software configured. You will also need to use...